Filter
Top Products
[SECURITY] menu
70 - ENGLISH
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and select
the item from the sub-menu.
Refer to
“
Navigating through the menu
”
(
page 41) regarding the operation of the menu
screen.
z
When the projector is used for the rst time
Initial password: Press in
order, and press the <ENTER> button.
z
After selecting the item, press to set.
Attention
z
Make the settings after displaying the [SECURITY]
screen.
z
When the [SECURITY] screen is displayed,
entering a password is required. Enter the set
password and then continue operations.
z
When the password has been changed previously,
enter the changed password, and press the
<ENTER> button.
Note
z
The entered password is displayed with * mark on
the screen.
[SECURITY PASSWORD]
The [SECURITY PASSWORD] screen is displayed
when the power is turned on. When the entered
password is incorrect, the operation will be restricted
to the STANDBY <
> button, the <SHUTTER>
button, and the <LENS> (<FOCUS>, <ZOOM>, and
<SHIFT>) buttons.
1) Press
▲▼
to select [SECURITY
PASSWORD].
2) Press ◀▶ to switch [SECURITY
PASSWORD].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Disables the security password entry.
[ON]
Enables the security password entry.
Note
z
The [SECURITY PASSWORD] setting is set to
[OFF] at the time of purchase or when all the user
data has been initialized.
z
Change the password periodically that is hard to
guess.
z
The security password is enabled after [SECURITY
PASSWORD] is set to [ON] and the power is turned
off (in the standby mode).
[SECURITY PASSWORD
CHANGE]
You can change the security password.
1) Press
▲▼
to select [SECURITY
PASSWORD CHANGE].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD CHANGE]
screen is displayed.
3) Press
▲▼
◀▶ to set the password.
z
Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the
conrmation.
6) Press the <ENTER> button.
Note
z
The entered password is displayed with * mark on
t
he screen.
z
An error message is displayed on the screen when
the entered password is incorrect. Re-enter the
correct password.
[DISPLAY SETTING]
You can overlap the security message (text or image)
over the projecting image.
1) Press
▲▼
to select [DISPLAY
SETTING].
2) Press ◀▶ to switch [DISPLAY
SETTING].
z
The setting will change as follows each time
you press the button.
[OFF] [TEXT]
[DEFAULT LOGO] [USER LOGO]
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO]
The picture registered by the user
is projected.
[DEFAULT LOGO]
The Panasonic logo is projected.