Panasonic PT-DX800U Home Theater System User Manual


 
[PROJECTOR SETUP] menu
ENGLISH - 65
Settings
[NO SIGNAL SHUT-OFF]
You can set the power of the projector automatically
to standby if there is no input signal by the specied
time.
1) Press
▲▼
to select [NO SIGNAL SHUT-
OFF].
2) Press ◀▶ to switch [NO SIGNAL
SHUT-OFF].
[DISABLE]
Disables [NO SIGNAL SHUT-
OFF].
[10MIN.] -
[90MIN.]
Allows you to set in ten minute
intervals.
[FUNCTION BUTTON]
You can set the <FUNCTION> button on the remote
control.
1) Press
▲▼
to select [FUNCTION
BUTTON].
2) Press the <ENTER> button.
3) Press
▲▼
to select the function.
[DISABLE] Disables the <FUNCTION> button.
[SUB MEMORY]
Switches the sub memory.
(
page 69)
[SYSTEM
SELECTOR]
Switches the setting for [SYSTEM
SELECTOR]. (
page 47)
[SYSTEM
DAYLIGHT
VIEW]
Switches the setting for [SYSTEM
DAYLIGHT VIEW]. (
page 46)
[FREEZE]
Freezes the image temporarily.
(
page 60)
[SIDE BY SIDE]
*1
Switches to two window display.
(
page 60)
*1: Only for PT-DW730U
4) Press the <ENTER> button.
[DATE AND TIME]
You can set the time zone, date, and time of the built-
in clock of the projector.
1) Press
▲▼
to select [DATE AND TIME].
2) Press the <ENTER> button.
3) Press
▲▼
to select [TIME ZONE].
4) Press ◀▶ to switch [TIME ZONE].
5) Press
▲▼
to select [ADJUST CLOCK].
6) Press the <ENTER> button.
z
The [ADJUST CLOCK] screen is displayed.
7) Press
▲▼
to select the item to be set,
and press ◀▶ to set the local date
and time.
8) Press
▲▼
to select [APPLY], and
press the <ENTER> button.
z
The setting of the time will be completed.
[SAVE ALL USER DATA]
You can save the various setting values as a backup
in the built-in memory of the projector.
1) Press
▲▼
to select [SAVE ALL USER
DATA].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter the security password and press
the <ENTER> button.
4) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
z
While data is saved, [PROGRESS] is displayed.
Note
z
The setting of the image registered in [USER
LOGO] will not be saved.