Panasonic PT-DX800U Home Theater System User Manual


 
Menu Navigation
42 - ENGLISH
Settings
Note
z
You cannot reset all the settings to the factory
default at a time.
z
To reset all the settings adjusted in the sub-menu
item to the factory default at a time, perform
initialization from the [PROJECTOR SETUP] menu
[INITIALIZE] (
page 66).
z
Some menu items cannot be reset by pressing the
<DEFAULT> button. Adjust each item manually.
z
The triangular mark under the bar scale in the
individual adjustment screen indicates the factory
default setting.
The position of the triangular mark varies by the
selected input signals.
Current setting
Factory default setting
MAIN MENU
There are following ten items in the main menu.
When a main menu item is selected, the screen
changes to a sub-menu selection screen.
Main menu item Page
[PICTURE] 42
[POSITION] 42
[ADVANCED MENU] 42
[DISPLAY LANGUAGE] 43
[DISPLAY OPTION] 43
[PROJECTOR SETUP] 43
[TEST PATTERN] 43
[SIGNAL LIST] 43
[SECURITY] 43
[NETWORK] 43
SUB MENU
The sub-menu screen of the selected main menu is
displayed, and you can set and adjust the various
items in the sub-menu.
[PICTURE]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]
*1
44
[CONTRAST] [0] 44
[BRIGHTNESS] [0] 44
[COLOR] [0] 45
[TINT] [0] 45
[COLOR TEMPERATURE] [DEFAULT] 45
[WHITE GAIN] [10] 46
[SYSTEM DAYLIGHT VIEW] [OFF]
*1
46
[SHARPNESS] [6] 46
[NOISE REDUCTION] [1] 46
[AI] [ON] 47
[SYSTEM SELECTOR] [YP
B
P
R
]
*1
47
*1: Depends on the signal input.
Note
z
The factory default settings may vary depending on
the picture mode.
[POSITION]
Sub-menu item
Factory default
Page
[SHIFT] 48
[ASPECT] [DEFAULT]
*1
48
[ZOOM] 49
[CLOCK PHASE] [16] 50
[KEYSTONE] 50
*1: Depends on the signal input.
[ADVANCED MENU]
Sub-menu item
Factory default
Page
[DIGITAL CINEMA
REALITY]
[AUTO]
*1
51
[BLANKING] 51
[INPUT RESOLUTION] 52
[CLAMP POSITION] [0] 52
[EDGE BLENDING] [OFF] 52
[RASTER POSITION] 53
*1: Depends on the signal input.