9
Front & Rear Panels—Continued
MASTER VOLUME control (50)
This control is used to adjust the volume of the AV
receiver to Min, 1 through 79 or Max.
PHONES jack (52)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
Input selector buttons (50)
These buttons are used to select from the following
input sources: DVD/BD, VCR/DVR, CBL/SAT,
GAME, AUX, TV/TAPE, TUNER, CD, PORT.
AUX INPUT (32)
This input can be used to connect a camcorder,
game console, and so on. There are jacks for com-
posite video, and analog audio.
PORTABLE (32):
Used to connect a portable Audio Player.
SETUP MIC jack (46)
The Audyssey 2EQ™ Room Correction and
Speaker Setup microphone connects here.
For detailed information, see the pages in parentheses.
SLEEP indicator (52)
Lights up when the Sleep function has been set.
MUTING indicator (52)
Flashes while the AV receiver is muted.
Listening mode and format indicators (59)
Show the selected listening mode and audio input
signal format.
Tuning indicators (53)
AUTO (53):
Lights up when Auto Tuning mode is selected for
AM or FM radio. Goes off when Manual Tuning
mode is selected.
TUNED (53):
Lights up when tuned to a radio station.
FM STEREO (53):
Lights up when tuned to a stereo FM station.
Message area
Displays various information.
Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: PCM, MULTI CH, or HDMI.
Audyssey indicator (45, 69)
Flashes during Audyssey 2EQ™ Room Correction
and Speaker Setup. Lights up when the “Equalizer
Settings” is set to “Audyssey”.
Display