Filter
Top Products
47
First Time Setup—Continued
• Make the room as quiet as possible.
Background noise can disrupt the
room measurements. Close
windows, silence cell phones,
televisions, radios, air conditioners,
fluorescent lights, home appliances,
light dimmers, or other devices.
• Cell phones should be turned off or
placed away from all audio
electronics during the measurement
process as Radio Frequency
Interference (RFI) may cause
measurement disruptions (even if the
cell phone is not in use).
4
Press [ENTER].
The room correction and speaker setup
starts.
Test tones are played through each
speaker as Audyssey 2EQ™ Room
Correction and Speaker Setup runs.
This process takes a few minutes.
Please refrain from talking during
measurements and do not stand
between speakers and the microphone.
5
The following screen appears.
Place the setup microphone at
the next position (page 45), and
then press [ENTER].
Audyssey 2EQ performs more
measurements. This takes a few
minutes.
2EQ: Auto Setup
Do not unplug setup mic.
Please keep quiet.
Now measuring. . .
Please place setup microphone at 2nd
of listening area at ear height.
Next
2EQ: Auto Setup
2EQ: Auto Setup
Do not unplug setup mic.
Please keep quiet.
Now measuring. . .
6
When prompted, place the setup
microphone at the next position,
and repeat step 5.
7
When the measurements are
complete, the following screen
appears.
8
When the calculations are com-
plete, the following screen
appears.
Use the Up and Down [ ]/[ ] but-
tons to select an option, and then
press [ENTER].
The options are:
Save:
Save the calculated settings and exit
the room correction and speaker
setup.
Cancel:
Cancel the room correction and
speaker setup.
Note:
You can view the calculated settings for
the speaker configuration, speaker dis-
tances, and speaker levels by using the
Left and Right [ ]/[ ] buttons.
9
If you selected “Save”, the results are
saved, and the following screen
appears.
2EQ: Auto Setup
Calculating...
2EQ: Auto Setup
Subwoofer : No
Front : Full Band
Center : 80Hz
Surround : 100Hz
Front High : 150Hz
Surr Back : 150Hz
Surr Back Ch : 2ch
Save
Cancel
Review Speaker Configuration
2EQ: Auto Setup
Saving...