Mitsubishi Electronics A953GOT Stereo Equalizer User Manual


 
8 - 7
8.2 System Configuration when EMC Directive is Applicable
8.2.3 Connection format
8.2.3 Connection format
Connection conditions where the A95*GOT is applicable to the EMC directive are shown below.
: Not compliant with EMC directive -: Connection impossible
<How to read the table>
The table indicates the GOT-compatible hardware version for each connection pattern and the
compatibility date.
Please use the GOT whose hardware version is later than that described.
8.2.4 When the communication/board module is used
(1) For A956GOT
Be sure to use the communication modules shown below with A956GOT. If communication
modules other than those shown below are used, they are not applicable to the EMC directive.
Connection format A950GOT A951GOT-Q A951GOT A953GOT A956GOT A956WGOT
Bus Connection
QCPU - - -
QnA/ACPU - - L(0105) - K(0105) E(0203)
CPU direct con-
nection
QCPU
(RS-232C)
- - - L(0105) - E(0203)
QnA/ACPU
(RS-422)
L(0105)----E(0203)
Computer link
connection
RS-232C - - - L(0105) - E(0203)
RS-422 L(0105)----E(0203)
MELSECNET connection ----
CC-Link connec-
tion
Intelligent device----K(0105)E(0203)
Remote device sta-
tion
----K(0105)
Ethernet connection ----P(0203)E(0203)
Connection format Communication module
Bus connection (QnA/ACPU)
A9GT-BUSS (Hardware version C or later)
A9GT-BUS2S (Hardware version C or later)
CC-Link connection
Intelligent device A8GT-J61BT13 (Hardware version E or later)
Remote device A8GT-J61BT15 (Hardware version C or later)
Ethernet connection A9GT-J71E71-T (Hardware version C or later)
L (0105)
Hardware version
(0105)
Month
Year (Last 2 digits of A.D. year)
Compatibility
date