Maxxsonics MAXX-2400HD Radio User Manual


 
MAXX-2400HD Owner’s Manual Page 79
Configuring NTP
The server GUI is used to set the time zone and to enter the networking parameters. The local
GUI must be used, as these configuration screens are not available on the Remote Workstation
Interface.
Selecting the Time Zone
Starting at the main menu bar, Click Edit->Configure->Date-Time screen. When
“Automatic Updates” is not checked, the Region and Zone lists are enabled. Select your region
and then the zone within that region. There may be more than one way to your zone;
America/New York, for example, is the same as US/Eastern. Click the APPLY button to activate the
settings,
After changing the time zone a Quick Restart must be performed before changes become
effective.
Figure 31 - Date/Time Configuration Screen