Filter
Top Products
Page 102 MAXX-2400HD Owner’s Manual
RAID Controller Settings
The server RAID controller is configured at the factory. The following is provided only to verify
these settings and to recreate them if necessary in the event the system is rebuilt. (The software
installation should configure these correctly, but they should be checked to verify accuracy.)
Do not use the Scheduled Events, Email Announcement or Remote Login features.
These settings are critical to proper operation of the system. The only parameter that can be
changed is “Continue on Source Error during Rebuild” which when turned on relaxes the condition
that any error found in the source material will stop the rebuild process.
It is particularly critical that the Write Cache be checked.