Filter
Top Products
Page 104 MAXX-2400HD Owner’s Manual
DXP-2 Technical Specifications
Digital Audio Module
Audio channels 8 per video channel (3 outputs x 8, 1 input x 8)
Audio format AES/EBU
Word Size 24-bit
Sampling Frequency 48 kHz
Audio connector XLR-3, gold plated
Data connection to server 68-pin x 1-meter cable connects DXP-2 to MAXX-2400HD
Audio synchronization Derived from video genlock
Dolby® compatibility Bit-for-Bit® reproduction of compressed audio data
Dimensions 3½” x 19” x 5¼“ [90 x 483 x 133mm] HWD.
Weight 8 lb [3.6 kg] net
Power 100 – 240 volts, 50/60 Hz, 50 watts
Power supplies Modular, dual, redundant with separate IEC AC mains connectors
Cooling Convection
Operating temperature 40º F to 85º F [4ºC to 29ºC]
Approvals RoHS compliant
Country of manufacture U.S.A.
AXP-3 Analog Audio Module
The AXP-3 Analog Audio Module provides 4 channels of balanced, +4 dBu analog audio on
XLR connectors, for each video input or output. The AXP-4 Analog Audio Module may also be
used in conjunction with the AXP-3, providing 4 additional audio channels—normally channels
4 through 8. Audio outputs from the AXP-3 and AXP-4 exactly duplicate embedded audio
contained within a video stream.
The AXP modules are housed in a 2-RU rack-mount enclosures (3½” – 88mm high), which
connect to the main server chassis with a 1-meter, 68-pin cable, included with the AXP. The
module is self-powered from AC mains, and contains all audio circuitry. (It is not a connector
‘break-out box’.)
AXP-3 Analog Audio I/O Module
The AXP modules contain dual redundant power supplies, operating from two separate AC
mains connections. Either power input can be lost with no effect on audio throughput. Two
blue LEDs indicate operation of the power supplies.
Precision internal trimmers allow input-output gain to be adjusted by ±1 dB. There are no
external controls or adjustments on the AXP modules.