Filter
Top Products
5
Nº512 CD/SACD™ Player
Power Requirements
At the factory, the Nº512 CD/SACD player is configured for 100,
120, 220, or 230–240 VAC power operation at 50Hz or 60Hz. Before
operating the Nº512, ensure that the power label on the rear panel
near the AC input connector indicates the correct operating voltage.
Caution! DO NOT attempt to adjust the operating voltage. Consult a Mark
Levinson dealer if the operating voltage is incorrect or must be
changed for relocation purposes.
Different operating voltages may require the use of different
power cords and/or attachment plugs. Contact a Mark Levinson
dealer for additional assistance.
Operating States
The Nº512 CD/SACD player is designed for continuous operation
and has three operating states:
• Off – when the front panel Power switch is turned off or the
power cord is removed from the rear panel.
• Standby – when the Nº512 is powered up, but the audio
outputs are muted.
• On – when the Nº512 is powered up and fully functional.
Caution! BEFORE moving the N
o
512 CD/SACD player, make sure it is
powered off with the Power button. Then make sure the power
cord is disconnected from the rear panel connector and the
electrical outlet.