Filter
Top Products
22
Mark Levinson
13. Shuffle Button
Randomly sorts the tracks on the loaded disc, creating a new
playlist. To shuffle the playback order of the tracks, press the Shuffle
button. The front panel displays “SHUFFLING” and playback starts
automatically. To cancel Shuffle mode, press the Stop button.
Shuffle mode can be activated when the Nº512 is in Stop mode or
when a disc is currently being played. While Shuffle mode is active,
some button functions and features may not be available.
Shuffle mode randomly sorts up to 30 tracks. If the disc contains
more than 30 tracks, some are not selected.
14. Repeat button
Scrolls between the normal playback mode and the two available
Repeat modes – Track Repeat or Disc Repeat. Multiple presses of the
Repeat button scrolls through the available options. When a new
mode is selected, the front panel display confirms the selection by
briefly displaying a message – REPEAT OFF, REPEAT TRK, OR
REPEAT DSC. The Track Repeat or Disc Repeat LEDs on the front
panel light if the respective Track Repeat or Disc Repeat options are
selected.
Repeat modes continue repeating the track or disc until the Repeat
mode is deactivated via the Repeat button, the disc is ejected or the
Stop button is pressed.
15. Mute button
Mutes the audio outputs. When the Mute button is pressed, the
front panel display briefly states “Full Mute” and the output is
muted. Press the Mute button again to return the volume to its
previous level. Mute is only available if the Volume control is set to
variable and is otherwise inactive.
16. Program Button
Allows you to customize the playlist of any CD or SACD disc. This
feature is only available when a disc is loaded. Up to 30 tracks can
be programmed from a single disc.
To select the playlist, press the Program button. The front panel
display shows the message “PGM MODE” to indicate that the player
is now in Program mode. The display then shows the message “0
PGM 0” to indicate that there are currently no tracks in the
program.
To add tracks to the program, enter the number of each track using
the number keypad. After each entry, the display shows the track
number and time for the track number pressed. Then the program
message follows – the first number is the last track number added to
the program, and the last number is the total number of tracks
added to the program. When the program is complete, press the
Play button to begin the playback.
Use the Clear button to delete the last track entry in the program.
To cancel the program, press the Program button or the Drawer