Mark Levinson 512 CD Player User Manual


 
29
Nº512 CD/SACD™ Player
Connecting the Cables
The Nº512 can be connected to the computer in two ways – through
a router or directly to the computer. Before connecting the cables,
ensure that both the computer and the Nº512 are powered down.
To Connect Using a Router:
1. Connect a network cable from the router to the Ethernet port
on the rear panel of the Nº512.
2. Connect a second network cable from the router to the Ethernet
port of the computer.
To Connect Without a Router:
Use a network crossover cable to connect the Nº512 directly to
the computer. Different from a standard network cable, the
crossover cable is designed to connect network access ports directly
together without a hub, router, or switch.
Connect the crossover cable from the Ethernet port on the rear
panel of the Nº512 to the Ethernet port of the computer.
Network Setup
Parameters
Accessible only through the Nº512 internal Web page, the network
setup parameters include:
Static IP Address – provides a fixed IP address. This IP
address is NOT automatically selected; it must be entered. If
DHCP is on, then an IP address doesn’t need to be entered.
IP address 192.168.50.8 is the factory default value.
•Subnet Mask – identifies the subnet mask for the Nº512.
This IP address is automatically assigned by DHCP. If DHCP
is off, then the address must be entered manually and it
must agree with the subnet mask address of the router. IP
address 255.255.255.0 is the factory default value.
Host Name – indicates the network name given to the
Nº512 player. The host name is made up of two parts that
are separated by an underscore. The first part contains one
Computer
N
o
512
Router
Crossover
Cable
Computer
N
o
512