Filter
Top Products
4
Mark Levinson
Placement and
Ventilation
DO install the Nº512 CD/SACD player on its own shelf for proper
ventilation.
DO install the Nº512 chassis on a solid, flat, level surface.
DO install the Nº512 CD/SACD player close to associated
components to keep interconnecting cables as short as possible.
DO select a dry, well-ventilated location out of direct sunlight.
DO allow at least 3 to 4 inches (8 to 10cm) of clearance above the
CD/SACD player for proper heat dissipation.
DO NOT place the Nº512 on a thick rug or carpet or cover the
Nº512 CD/SACD player with a cloth, as this might prevent proper
cooling.
DO NOT expose the Nº512 CD/SACD player to high temperatures,
humidity, steam, smoke, dampness, or excessive dust. Avoid
installing the player near radiators and other heat-producing
appliances.
DO NOT install the Nº512 near unshielded TV or FM antennas,
cable TV decoders, or other RF-emitting devices that might cause
interference.
DO NOT place the Nº512 on a window sill or in any location
where it will be exposed to direct sunlight.
DO NOT obstruct the IR (infrared) receiver/transmitter located on
the front panel display. The remote control must be in line-of-sight
with the front panel IR receiver. If strong sunlight or fluorescent
light shines on the IR receiver, the remote control may be
unreliable.
Warning! MAKE SURE all components are properly grounded. Do not
defeat the safety purpose of polarized or grounding-type plugs
with “ground-lifter” or “cheater” adapters. Doing so may cause
dangerous voltage to build up between components, which may
result in personal injuries and/or product damage.