Filter
Top Products
21
Nº512 CD/SACD™ Player
8. Number Keypad
Includes the buttons 0 through 9 and the +10 button. The number
keypad is used to enter specific track numbers. If the disc is loaded,
pressing a number automatically starts the playback of that track
number selected.
The numbers 1 through 9 can be used to play the individual track
numbers. For higher numbered tracks, the +10 key MUST be pressed
first and then followed by the appropriate 0 to 9 digit. If a second
digit is not entered within a few seconds, the display clears without
changing tracks.
Pressing the +10 button more than once adds to the initial digit. For
instance, if you want to play Track 23, you would press the +10
button, the +10 button, and then the 3 button.
9. Display Intensity
button
Controls the brightness intensity level of the Nº512 front panel
display and all front panel LEDs. Multiple presses of the Display
Intensity button scrolls through the brightness levels – High,
Medium, Low, and Off.
If the display is set to off, pressing any key lights the display at
medium intensity for several seconds before turning it off again so
that the display can indicate the action that you performed.
Note When the display intensity is set to Off, the active front panel LEDs
remain lit but at their dimmest setting.
10. Light button
Illuminates the Nº512 remote control with a backlight. After a short
period of illumination, the backlight automatically turns off.
11. Standby button
Activates and deactivates the Standby mode. The Standby LED
located directly above the Standby button on the front panel is
illuminated when the Nº512 is operational and blinks slowly when
the Nº512 is in Standby mode. To remove the Nº512 from Standby
mode, press the Standby, Drawer, or Play button.
12. Previous and Next
buttons
Allows you to begin the previous () track or proceed to the next
() track on the disc.
To Restart the Current Track – press the Previous () button to
return to the beginning of the currently playing track. If the
playback is within the first second of the track, then pressing the
Previous () button returns the playback to the beginning of the
previous track.
To Proceed to the Next Track – press the Next () button to
advance to the beginning of the next track.