Filter
Top Products
13
Nº512 CD/SACD™ Player
The SACD LED under the front panel display lights when a SACD
disc is loaded into the player. If the CD layer is selected on the disc,
then the SACD LED is not lit.
Once playback of the SACD disc has started, the CD/SACD button
becomes inactive. Only when the player is in Stop mode can the
different layers of the SACD be accessed.
Note If a normal CD is loaded in the player, then this button is inactive and
has no function.
15. Power button
Controls the AC input to the Nº512 when the supplied power cord is
connected between the rear panel power connector and an electrical
outlet.
Caution! Before operating the N
o
512, verify that the voltage label near the
AC input connector indicates an operating voltage compatible
with the voltage level of the electrical outlet you intend to use.
• When the Nº512 is off, pressing the Power button supplies AC
power, putting the Nº512 into Standby mode.
• When the Nº512 is powered on or is in Standby mode, pressing
the Power button turns off the Nº512.
Note If the Nº512 is connected to ML Net and the master is in Standby
mode, setting the power button to the On position also puts the Nº512
into Standby mode. The Nº512 can only be turned on if the master is
turned on.