Filter
Top Products
6
ENGLISH
n
Subwoofer Output
Connect this jack to the line level input of a
powered subwoofer. If an external subwoofer
amplifier is used, connect this jack to the
subwoofer amplifier input. If you are using two
subwoofers, either powered or with a 2 channel
subwoofer amplifier, connect a “Y” connector to
the subwoofer output jack and run one cable from
it to each subwoofer amplifier.
m
Preamp Outputs (L, R, SL, SR, SB, C)
Jacks for L (front left), R (front right), C (Center),
SL (surround left), SR (surround right) and SB
(surround back).
Use these jacks for connection to some external
power amplifiers.
,
6.1 CHANNEL INPUT
By connecting a DVD Audio player, SACD multi
channel player, or other component that has a
multi channel port, you can playback the audio with
5.1 channel or 6.1 channel output.
.
Speaker outputs terminals
Six terminals are provided for the front left, front
right, front center, surround left, surround right and
surround back speakers.
⁄0
REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with
remote control (RC-5) terminals.
⁄1
DIGITAL INPUT (Dig.1 - 4) / OUTPUT
(coaxial, optical)
These are the digital audio inputs and outputs.
There are 2 digital inputs with coaxial jacks, 2 with
optical jacks.
The inputs accept digital audio signals from a
compact disc, LD, DVD, or other digital source
component.
For digital output, there is 1 coaxial output and 1
optical output.
The digital outputs can be connected to MD
recorders, CD recorders, DAT decks, or other
similar components.
⁄2
Power cable
Connect to AC power outlet.
SR4400 can be powered by 120 V AC only.
Caution:
• In order to avoid potential turn-off thumps,
anything plugged in here should be powered up
before the SR4400 is turned on.
⁄3
AC OUTLETS
Connect the AC power cables of components such
as a DVD and CD player to these outlets.
SWITCHED and UNSWITCHED outlets are
provided.
The one marked SWITCHED provides power only
when the SR4400 is turned on and is useful for
components which you use every time you play
your system.
The one marked UNSWITCHED is always live as
long as the SR4400 is plugged into a live outlet.
A component connected here may be left on
permanently, or may be switched off with its own
power switch.
Caution:
• In order to avoid potential turn-off thumps,
anything plugged in here should be powered up
before the SR4400 is turned on.
• The capacity of these AC outlets are 100W. Do
not connect devices that consume electricity more
than the capacity to these AC outlets. If total
power consumption of connected devices exceeds
the capacity, protection circuit shuts down the
power supply.
REMOTE CONTROL
OPERATION
FUNCTION AND OPERATION
The provided remote control unit is a universal re-
mote controller. The POWER button, numeric but-
tons and control buttons are used in common across
different input source components.
The input source controlled with the remote control
unit changes when one of the input selector but-
tons is pressed.
z
Transmitting indicator
Lights up during a button is pressed and an infrared
signal is sending.
x
(Main) POWER buttons
Press to switch the power of the SR4400 ON or OFF
after pressing the AMP button.
c
Input selector buttons/ FUNCTION
SELECTOR buttons (AUDIO/VIDEO INPUT)
These buttons are used to select a Audio or Video
source component. Press one of these buttons once
to change the function of the remote control. Press
same button within 2 seconds, the input function of
the SR4400 is changed.
Note:
• CDR/MD button is set CDR function at initial. To
switch MD function, press and hold down CDR/
MD button and press 2 button.
• To return CDR function, press and hold down
CDR/MD button and press 1 button.
• AUX button is unavailable for SR4400.
v
MAIN VOLUME UP ( ) /DOWN ( ) buttons
Main volume control of the SR4400. The front, sur-
round, center and subwoofer channel volumes con-
trolled by these buttons simultaneously.
b
MUTE button
Muting button of the SR4400. Press this button de-
crease the sound temporarily . Press this button
again to return to the previous sound.
When this button is pressed, “MUTE” indicator lights
up.
n
MENU button
This button is used to enter the SETUP MAIN MENU.
m
Cursor buttons ( , , , , OK)
Use these button when operating the SETUP MAIN
MENU.
See page 15.
,
MENU OFF button
This button is used to exit from the SETUP MAIN
MENU.
OK
DISC/DECK
PTY
ATT.
–/B /VCR+/A /ANT
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
SYSTEM REMOTE CONTROLLER
RC5400SR
.
,
m
n
b
v
¤4
c
x
z
⁄0
⁄1
⁄2
⁄3
⁄4
¤2
¤1
¤0
⁄9
⁄8
⁄7
⁄6
⁄5
¤3
03.4.10, 3:00 PMPage 6