Filter
Top Products
25
ENGLISH
DIMMER (DISPLAY)
You can change the display brightness of the front
display.
Press the DISPLAY button to change the
brightness.
When this button is pressed, the brightness is
changed in the following sequence.
→ dimmed → Display Off → normal → dimmed
....
Note:
• Only DISP indicator will light up on the front
display in display off condition
SELECTING ANALOG AUDIO INPUT
OR DIGITAL AUDIO INPUT
If you have already assign any digital input to input
source.
You can select temporarily the audio input mode
for each input source with the A/D button on the
remote controller or front panel.
When this button is pressed, the input mode is
switched in the following sequence.
→ Digital Auto → Digital → Analog → Digital
Auto....
In Digital Auto mode, the types of signals being
input to the digital and analog input jacks for the
selected input source are detected automatically.
If no digital signal is being input, the analog input
jacks are selected automatically.
In Digital mode, input is fixed to an assigned digital
input terminal.
In analog mode, the analog input jacks are
selected.
This selecting is temporarily, so the result will not be
stored in memory.
If you need to change input mode completely, use
SYSTEM SETUP in SETUP menu system.(see
page 16)
RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source
selected for listening through the SR4400 is sent to
the record outputs.
This means that any program you are watching or
listening to may be recorded simply by placing
machines connected to the outputs for TAPE OUT
, CD-R/MD OUT, VCR1 OUT, and DSS/VCR2
OUT in the record mode.
To record the input source signal you are
currently watching or listening to
1.
Select the input source to record by pressing
the corresponding input selector button.
The input source is now selected and you may
watch or listen to it as desired.
2.
Outputs the currently selected input source
signal to the TAPE OUT , CD-R/MD OUT,
VCR1 OUT, and DSS/VCR2 OUT outputs for
recording.
3.
Start recording at the recording component as
desired.
Notes:
• If you change the input source during recording,
you will record the signals from the newly
selected input source.
• You cannot record the surround effects.
OTHER FUNCTION
ATTENUATION TO ANALOG INPUT
SIGNAL
When the input signal is too high and the voice
distorts even by throttling the SR4400 VOLUME
control, turn on this function. “ATT” is indicated
when this function is activated.
“ATT” indicator will light up when this function is
activated. The signal-input level is reduced by
about the half. Attenuation will not work with the
output signal of TAPE-OUT, CD-R/MD-OUT,
VCR1-OUT and DSS/VCR2-OUT.
This function is memorized for each individual
input source.
LISTENING OVER HEADPHONES
This jack may be used to listen to the SR4400’s
output through a pair of headphones. Be certain
that the headphones have a standard 1/4" stereo
phone plug. (Note that the main room speakers will
automatically be turned off when the headphone
jack is in use.)
Notes:
• When using headphones, the surround mode will
automatically change to STEREO.
• The surround mode returns to the previous setting
as soon as the plug is removed from the jack.
CLEAR TUNING/PRESET
MEMORY
PHONES
SURROUND
STANDBY
POWER ON/STANDBY
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/
TV
A/D
VCR1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
PHONES
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
ES
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DISPLAY
VCR1
ND RECEIVER SR4400
CH-IN
6.1
ND RECEIVER SR4400
CH-IN
6.1
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
VCR1
1.
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
VOL.VOL.
TV
1.
MAIN
F/P
MODE
ET
MUTE
CDR/MD
TAPE
CD
TUNER
DISPLAY
UP
VOLUME
DOWN
DIMMER
CLEAR
MEMORY
PHONES
SURROUND
STANDBY
POWER ON/STANDBY
HT-EQ
DVD
TV
A/D
VCR1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
A/D
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
BASS
SYSTEM REMOTE CONTROLLER
RC5400SR
+/A
/VCR
/ANT
–/B
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
• Digital input signals are only output to the digital
outputs. There is no conversion from digital to
analog .
When connecting CD players and other digital
components, do not connect only the digital
terminals, but the analog ones as well.
HT-EQ
Press the HT-EQ button on the front panel to turn
on the HT-EQ mode.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is because
film soundtracks were designed to be played back
in large movie theater environments.
Activating the HT-EQ feature when watching a film
made for movie theaters corrects this and restores
the correct tonal balance.
The HT-EQ feature can be activated only while in
Dolby Pro Logic Mode, or while decoding Dolby
Digital or DTS encoded material.
6.1 CH INPUT.
The SR4400 is equipped for future expansion
through the use of Multi channel SACD multi
channel player or DVD-Audio player.
This is selected, the input signals connected to the
Front left, Front right, Center, Surround left,
Ssurround right and Surround back channels of
the 6.1 CH. In jacks are output directly to the front
(left and right), center, surround (left and right) and
surround back speaker systems as well as the pre-
out jacks without passing through the surround
circuitry.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer)
jack.
When 6.1 CH. INPUT is selected, the last video
input used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video
sources.
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
PHONES
SURROUND
STANDBY
POWER ON/STANDBY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DISPLAY
VCR1
UP
VOLUME
DOWN
AV SURROUND RECEIVER SR4400
CH-IN
6.1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
HT-EQ
03.4.10, 3:01 PMPage 25