Marantz SR4400 Stereo Receiver User Manual


 
19
ENGLISH
Notes:
Speakers that you selected “None” for in the
Speaker Size Setup menu will not appear.
The setup level for each channel is memorized for
reproduction in all surround mode.
To adjust the speaker levels for 6.1-channel input
sources, you will need to use the 6.1CH Level
Input setup menu.
When Mix is selected, subwoofer output is
determined depending on the speaker sizes for
each channels. If the front speaker size is set to
Large, subwoofer output is only the LFE signal
contained in Dolby Digital or DTS processed
signals.
Note:
When Front speaker is set ”SMALL”, then BASS
MIX is set “MIX”. (The display appears “BASS
MIX = ✱✱✱”.)
LFE
Select the output level of the LFE signal
included in the Dolby Digital signal or the DTS
signal.
Select 0dB, -10 dB or OFF with Left or Right
cursor button.
This setting is available during a digital signal is
playback.
4. PL II (DOLBY PRO LOGIC II )
In this mode, the SR4400 includes three controls
to fine-tune the sound-field as follow.
1.
Select 4.PRO LOGIC II in SETUP MAIN
MENU with
or cursor button.
2.
Press the OK button to enter the menu.
3.
Press or cursor button to select a desired
item.
4.
Press or cursor button to select the mode
or set the level.
5.
When you select TO MAIN MENU by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
EXIT then press the OK button to exit the
SETUP MENU.
PANORAMA:
Select the Panorama mode On or Off with or
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.
DIMENSION:
Set the Dimension level between 0 and 6 level in
1 level interval with or cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more
suitable balance from all the speakers with
certain recordings.
C WIDTH:
Set the Center width level between 0 and 7 level
in 1 level interval with or cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the
center is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If NONE was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
MENU STRUCTURE of Speaker Level setup
MANU AUTO
SW
L C
SB
R
SL SR
EXITRETURNTO MAIN MENU
Speaker
(Auto)
Speaker
Distance setup
MAIN
MENU
exit SETUP
MENU
Test Tone mode
Speaker
Level setup
Speaker
Distance
setup
Direct selec
by remote
control
Listening
Positiom
3. PREFERENCE
1.
Select 3. PREFERENCE in SETUP MAIN
MENU with or cursor button.
2.
Press the OK button.
3.
Press or cursor button to select a desired
item.
4.
Press or cursor button to adjust.
5.
When you select TO MAIN MENU by
pressing the
or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the
or cursor button to select
EXIT then press the OK button to exit the
SETUP MENU.
BASS MIX
The bass mix setting is only valid when LARGE
is set for the front speakers and YES is set for
the subwoofer at stereo playback .
When the BOTH is selected, the low frequency
signal range of LARGE are produced
simultaneously from those channels and the
subwoofer channel.
When actual low frequency sound volume is
weak depending on room size, use this function
to fill low frequency sound equally in the room.
MENU STRUCTURE of PREFERENCE setup
BOTH
MIX
BASSMIX
LFE
EXITTO MAIN MENU
exit SETUP
MENU
0 dB
-10 dB
OFF
3.PREFERENCE
4. 5.
2. 5.
1. 3. 5.
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMPAUX
OK
VOL.VOL.
TV
MAIN
4. 5.
2. 5.
1. 3. 5.
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMPAUX
OK
VOL.VOL.
TV
MAIN
03.4.10, 3:01 PMPage 19