Marantz SR4400 Stereo Receiver User Manual


 
17
ENGLISH
Notes:
When a DTS-LD or DTS-CD is playing, this setup
is not available. This is to avoid noise being
generated from the analog input.
• If “Dx-AUTO” is selected and a DVD, compact
disc or LD is fast forwarded during playback,
decoded signals may produce a skipping sound. In
such cases, change the setting to DIGITAL.
• Same digital input function cannot be set. In this
case, the previous setting is set to ANALOG.
Same digital input number cannot be set in Digital
AUTO mode and Digital Fixed mode. For
example, D1AUTO and DIG.1 are not set at same
time.
2. SPEAKER SETUP
After you have installed the SR4400, connected all
the components, and determined the speaker
layout, it is now time to
perform the settings in the Speaker Setup menu
for the optimum sound acoustics for your
environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
SPEAKER SIZE
When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:
The complete frequency range for the channel
you are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to NONE and the front
speakers are set to Large, then the sound may
be output from both the left and right speakers.
1.
Select 2.SPEAKER in SETUP MAIN MENU
with
or cursor button,
2.
Press the OK button to enter the menu. The
first sub-menu item is Speaker Size setup.
3.
Press or cursor button to select the each
speaker.
4.
Press or cursor button to select the setting
of size to each speaker.
5.
If you finish these setup, press the or
cursor button to select NEXT.
4. 6.
2. 6.
1. 3. 5.
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMPAUX
OK
VOL.VOL.
TV
MAIN
MENU STRUCTURE of Speaker Size setup
Speaker Size
Select when a subwoofer is connected.
Select if the front speakers are small sized.
Select if the center speaker is small sized.
Select when a subwoofer is not connected.
Select if the front speakers are large sized.
Select if the center speaker is large sized.
Select if no center speaker is connected.
Select when a surround back speaker is not connected.
Select when a surround back speaker is connected.
Select if no surround left and right speakers are connected.
Select if the surround left and right speakers are large sized.
Select if the surround left and right speakers are small sized.
MAIN MENU
exit SETUP
MENU
Speaker Distance
setup
Speaker Size
setup
YES
NONE
SMALL
LARGE
SMALL
L & R
CENTER
LARGE
NONE
SMALL
LARGE
NONE
YES
SL & SR
SURR.B
NONE
TO MAIN
MENU
EXIT
SUBW2.SPEAKER
NEXT
SPEAKER DISTANCE
Use this parameter to specify the distance of each
speakers position from the listening position. The
delay time is automatically calculated according to
these distances.
Begin by determining the ideal or most commonly
used seating position in the room.
This is important for the timing of the acoustics to
create the proper sound space that the SR4400
and todays sound systems are able to produce.
Note that the speakers that you selected None
for in the Speaker Config sub-menu will not appear
here.
1.
Enter to the Speaker Distance setup from
the previous Speaker Size setup.
2.
Press or cursor button to select the each
speaker.
3.
Press or cursor button to set the distance
from your listening position for each speaker.
4.
After finishing the Speaker Distance setup,
press the
or cursor button to select
NEXT.
5.
Press the OK button to enter the next
Speaker Level setup.
Or press the or cursor button to select
EXIT then press the OK button to exit the
SETUP MENU.
Or press the
or cursor button to select TO
MAIN MENU then press the OK button to
return the SETUP MAIN MENU.
Or press the
or cursor button to select
RETURN then press the OK button to return
the previous Speaker Distance setup.
3. 5.
5.
2. 4.
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMPAUX
OK
VOL.VOL.
TV
MAIN
6.
Press the OK button to enter the next
Speaker Distance setup.
Or press the
or cursor button to select
EXIT then press the OK button to exit the
SETUP MENU.
Or press the
or cursor button to select TO
MAIN MENU then press the OK button to
return the SETUP MAIN MENU.
03.4.10, 3:01 PMPage 17