Marantz SR4400 Stereo Receiver User Manual


 
18
ENGLISH
L&R :
Set the distance from the front left and right
speakers to your normal listening position
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).
C :
Set the distance from the center speaker to your
normal listening position between 1 and 30 feet
in 1.0 foot interval
(0.3 to 9 meters in 0.3-meter intervals).
SLR:
Set the distance from the surround left and right
speaker to your normal listening position
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).
SPEAKERS LEVEL
Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level.
Note:
The speaker level settings is not available in
6.1channel input mode and S-Direct mode.
TEST MODE : Selects MANU (manual) or
AUTO for generating mode of
test tone
or cursor button.
If you select AUTO by pressing the button, the
test tone will be cycled through in a circular pattern
which is L (Left) C (Center) R (Right) SR
(Surround Right) SB (Surround Back) SL
(Surround Left) SW (Subwoofer L ..
increments of 2 seconds for each channel.
Using the and cursor buttons, adjust the
volume level of the noise from the speaker so that
it is the same level for all speaker.
When you select TO MAIN MENU by pressing
the OK button, you can return the SETUP MAIN
MENU by pressing the OK button . Or press the
or cursor button to select EXIT then press the
OK button to exit the SETUP MENU.
Or press the or cursor button to select
RETURN then press the OK button to return the
previous SPEAKER DISTANCE setup.
If you select MANU, adjust the output level of
each speaker as follow.
1.
When you select MANUAL in T.MODE menu
by pressing the
or button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the
button. This unit will emit the
pink noise from the center speaker.
MENU STRUCTURE of Speaker Distance setup
button
button
30 feet (3.0m)
29 feet (2.7m)
L&R
C
SLR
SW
SB
2 feet (0.6m)
EXIT
Minimum
Maximum
1 foot (0.3 m) interval
RETURNTO MAIN MENU
1 feet (0.3m)
NEXT
Distance
Speaker
Size setup
MAIN
MENU
exit SETUP
MENU
Speaker
Level setup
Speaker
Speaker
Distance setup
Speaker
Size setup
2.
Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted to
any level between 10 and +10 dB in 1dB
intervals).
3.
Press the cursor button again. This unit will
now emit the pink noise from the front right
speaker.
4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
5.
When you select TO MAIN MENU by
pressing the OK button, you can return the
SETUP MAIN MENU by pressing the OK
button . Or press the or cursor button to
select EXIT then press the OK button to exit
the SETUP MENU.
Or press the or button to select
RETURN then press the OK button to return
the previous SPEAKER DISTANCE setup.
1. 5.
5.
2. 5.
1. 3. 5.
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMPAUX
OK
VOL.VOL.
TV
MAIN
+10dB
+9dB
-9dB
Minimum
Maximum
1 dB interval
Reference
1 dB interval
-10dB
(SW -15 dB)
button
button
0dB
SW :
Set the distance from the subwoofer to your
normal listening position between 1 and 30 feet
in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter
intervals).
SB:
Set the distance from a surround back speaker
to your normal listening position between 1 and
30 feet in 1.0-foot intervals (0.3 to 9 meters in
0.3-meter intervals).
Note
Speakers that you selected “No” or “None” for in
the Speaker Size menu will not appear.
03.4.10, 3:01 PMPage 18