Marantz SR4400 Stereo Receiver User Manual


  Open as PDF
of 36
 
27
ENGLISH
“AUTO PRESET” will appear on the display,
and scanning starts from lowest frequency.
3.
Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
• The band can be changed by TUNER
button .
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02
If you wish to skip the current station, press
the TUNING
button during this period, this
station is skipped and auto presetting
continues.
5.
Operation stops automatically when all 30
preset memory positions are filled or when
auto scanning attains the highest endof all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
MANUAL PRESET MEMORY
(Using the SR4400)
1.
Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).
2.
Press the MEMORY button on the front panel.
“– –“ (preset number) starts blinking on the
display.
3.
Select the preset number by pressing the
TUNING
or button, while this is still
blinking (approx. 5 seconds)
4.
Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified
preset memory location.
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
PHONES
SURROUND
STANDBY
POWER ON/STANDBY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DISPLAY
VCR1
V
DOWN
AV SURROUND RECEIVER SR4400
CH-IN
6.1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
TUNING/PRESETCLEAR
MEMORY
5.
2.
5.
6.4.
SURROUND
4.
(Using the remote control unit)
1.
Press the P.SCAN on remote.
“PRESET SCAN” appears on the display and
then the preset station with the lowest preset
number is recalled first.
2.
Preset stations are recalled in sequence (No.1
→ No.2 → etc.) for 5 seconds each.
No stored preset number will be skipped.
3.
You can fast forward the preset stations by
pressping the
§§
§§
§ continuously.
When the desired preset station is received,
cancel the preset scan operation by pressping
the CLEAR or P.SCAN.
CLEARING STORED PRESET STATIONS
You can remove preset stations from memory
using the following procedure.
1.
Recall the preset number to be cleared with
the method described in “RECALLING” a
preset station.
2.
Press the MEMORY button on the front panel or
press MEMO button on the remote.
3.
Stored preset number blinks in the display for
5 seconds. While blinking, press the CLEAR
button on the front panel or press CLEAR on
the remote unit.
4.
“xx CLEAR” appears on the display to
indicate that the specified preset number has
been cleared.
Notes:
• To clear stored all preset stations, press and hold
the CLEAR and the F/P buttons for two seconds.
(Using the remote control unit)
1.
Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).
2.
Press the MEMO button on the remote unite.
“– –“ (preset number)starts blinking on the
display.
3.
Enter the desired preset number by pressping
numeric buttons.
Note:
• When entering a single digit number (2 for
example), either input “02” or just input “2” and
wait for a few seconds.
RECALLING A PRESET STATION
(Using the SR4400)
1.
Press the F/P button to show the preset
station on the display.
2.
Select the desired preset station by pressing
the TUNING
or button on the front panel
(Using the remote control unit)
1.
Press the 4 or ¢ button to select the
desired preset station, or input your desired
preset channel with numeric buttons on the
remote.
PRESET SCAN
NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset
channel to be entered using alphanumeric
characters.
Before name inputting, need to store preset
stations with the preset memory operation.
1.
Recall the preset number to be inputted name
with the method described in “RECALLING” a
preset station.
2.
Press the MEMORY button on the front panel
or press MEMO on the remote for more than 3
seconds.
3.
The left most column of the station name
indicator flashes, indicating the character
entry ready status.
4.
When the SELECT knob is turned or press
55
55
5
/
66
66
6 button on the remote, alphabetic and
numeric characters will be displayed in the
following order:
A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +
→ / → (Blank) → A
UP →
← DOWN
To clear the input charcter, press the CLEAR
button on the front panel or on the remote.
5.
After selecting the first character to be
entered, press the MEMORY button on the
front panel, or press MEMO button on the
remote.
The entry in this column is fixed and the next
column starts to flash. Fill the next column
same as.
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DISPLAY
VCR1
D RECEIVER SR4400
CH-IN
6.1
D RECEIVER SR4400
CH-IN
6.1
TUNING/PRESET
MEMORY
2.
4. 3.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
OK
3.
2.
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DISPLAY
VCR1
R SR4400
CH-IN
6.1
R SR4400
CH-IN
6.1
TUNING/PRESET
F/P
2. 1.
CLEAR TUNING/PRESET
MEMORY
PHONES
SURROUND
STANDBY
POWER ON/STANDBY
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CD
TV
A/D
VCR1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
CLEAR
MEMORY
3. 2.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
1.
1.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
+/A
/VCR
/ANT
–/B
3.
1.
3.
3.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
+/A
/VCR
/ANT
–/B
2.
3.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
654
98
0
7
SYSTEM REMOTE CONTROLLER
RC5400SR
+/A
/VCR
/ANT
–/B
2. 5. 6.
5.
3.
4.
03.4.10, 3:01 PMPage 27
 previous next