Filter
Top Products
21
ENGLISH
To adjust the bass effect , press BASS or
BASS on the remote.
To adjust the treble effect , press TREBLE or
TREBLE on the remote.
Notes :
• The tone control function can work for the front
left and front right speakers.
• When Source Direct mode is set, tone control is
disable.
TEMPORARILY TURNING OFF THE
SOUND
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the front panel or remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
“MUTE” .
Press the MUTE button again to return to normal
operation.
USING THE SLEEP TIMER
To program the SR4400 for automatic standby,
press SLEEP buton on the remote.
Each press of the button will increase the time
before shut down in the following sequence.
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
VOL.
MAIN
VOL.
TV
SURR. BACK :
Adjust the volume level of the surround back
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
• If “None” was selected for the Surround back
speakers setting in the Speaker size, then this
setting will not appear.
CENTER :
Adjust the volume level of the center speaker
between -10 dB and +10 dB in 1 level interval
with
or cursor button.
• If “None” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
SUB W :
Adjust the volume level of the subwoofer
speaker between -15 dB and +10 dB in 1 level
interval with
or cursor button.
• If “None” was selected for the Subwoofer speaker
setting in the Speaker size, then this setting will
not appear.
When you select “TO MAIN MENU” by pressing
the
or button, you can return the SETUP MAIN
MENU by pressing the OK button.
Note:
• SURR.L/R, SURR. BACK, CENTER and SUB W
volume level are synchronized with SETUP
MAIN MENU Speaker Level. (Page 18)
SURROUND MODE
C(Center)LEV
SL(Surround Left)LEV
SR(Surround Right)LEV
SB(Surround back)LEV
EXITTO MAIN MENU
exit SETUP
MENU
MODE
/
Speaker
S(Subwoofer)LEV
7.SURROUND
setup
MENU STRUCTURE of SURROUND setup
BASIC OPERATION
(PLAY BACK)
SELECTING AN INPUT SOURCE.
Before you can listen to any input media, you must
first select the input source at the SR4400.
E.G. : DVD
To select DVD, simply press the DVD button on
the front panel or press DVD button on the remote.
After you have selected DVD, simply turn on the
DVD player and play the DVD.
• The input name will appear in the display on the
front-panel.
• As the input is changed, the SR4400 will
automatically switch to the digital input,
surround mode, attenuation, and night mode
status that were entered during the configuration
process for that source.
• When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Outputs. This
permits simultaneous viewing and listening to
different sources.
• When a Video source is selected, the video
signal for that input will be routed to the Monitor
Outputs jack and will be viewable on a TV
monitor connected to the SR4400.
SELECTING THE SURROUND MODE
E.G. : AUTO SURROUND
To select the surround mode during playback, turn
the SURROUND knob on the front panel or press
the surround mode button on the remote .
ADJUSTING THE MAIN VOLUME
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or MAIN
VOL. / buttons on the remote.
To increase the volume, turn the VOLUME knob to
clockwise or press MAIN VOL. button on the
remote, to decrease the volume, turn it to
counterclockwise or press MAIN VOL. button on
the remote.
Notes:
• The volume can be adjusted within the range of –
∞ to + 18 dB, in steps of 1 dB.
• However, when the channel level is set as
described on page 18, if the volume for any
channel is set at +1 dB or greater, the volume
cannot be adjusted up to +18 dB.
(In this case the maximum volume adjustment
range is “+18 dB - Maximum value of channel
level)
ADJUSTING THE TONE(BASS &
TREBLE) CONTROL.
During a listening session you may wish to adjust
the Bass and Treble Control to suit your listening
tastes or room acoustics.
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DISPLAY
VCR1
R SR4400
CH-IN
6.1
R SR4400
CH-IN
6.1
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
VCR1
CH-IN
6.1
CH-IN
6.1
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
VCR1
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
VOL.VOL.
TV
MAIN
CLEAR
MEMORY
PHONES
SURROUND
STANDBY
POWER ON/STANDBY
HT-EQ
DVD
TV
A/D
VCR1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
AV SURROUND RECEIVER SR4400
CH-IN
6.1
SURROUND
TUNE/SEARCH
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
9
0
T.TONE
MENU OFF
SETUP/
OK
321
654
87
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
CHANNEL/SKIP
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
+/A
/VCR
/ANT
–/B
TREBLE
BASS
F/P
MODE
ET
MUTE
CDR/MD
TAPE
CD
TUNER
DISPLAY
UP
VOLUME
DOWN
UP
VOLUME
DOWN
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
OK
VOL.
MAIN
VOL.
TV
F/P
MODE
ESET
MUTE
CDR/MD
TAPE
CD
TUNER
DISPLAY
UP
VOLUME
DOWN
MUTE
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
OK
VOL.
MAIN
VOL.
TV
03.4.10, 3:01 PMPage 21