Filter
Top Products
GENERAL FUNCTION
8
-dB
50 40 24 6 2 0
TRACK
TIME
12
OVER
5
5
5
5
5
5
5
5
Data Display
Changing Display Information
Pressing DISPLAY (TIME/DATE) key changes the
display information as follows.
During stop mode
q Total Track No Total Track Time
w Total Track No Remain Time
(time available for recording
at the selected bit rate)
e Current Time
r Current Date
Charging Battery
Charging Battery is done while,
• power is supplied from AC adaptor.
• Ni-Cad battery is loaded.
• presetting of battery is Ni-Cad battery (refer to page xxx,
PRESETTING).
• CHARGE slide switch setting is ON
While charging, charge LED blinks. After charge is
completed, charge LED becomes stably on.
Note
• Charge does not happen and charge LED turns off while
power is on. Charge occurs only in standby (power off)
status.
Low Battery Warning and
Auto Power Off
When the remaining battery energy is anticipated to last
in about xxx minutes, battery warning indicator turns
on in the display (1st warning).
After that, when the remaining battery energy is
anticipated to last soon, battery warning indicator in the
display and REC LED start to blink, and beep sound
turns on and off in 1 second interval (2nd warning).
After 2nd warning, when the battery voltage goes down
lower than operating voltage, the unit enters auto
power off process. If the unit is working (playback,
recording, editing), necessary shut down process (file
update and closing) takes place. Then the power is
turned off and the unit enters standby status.
-dB
50 40 24 6 2 0
TRACK
TIME
12
OVER
SP
-dB
50 40 24 6 2 0
TRACK
TOTAL TIME
12
OVER
SP
-dB
50 40 24 6 2 0
TRACK
REMAIN TIME
12
OVER
SP
-dB
50 40 24 6 2 0
TIME
12
OVER
SP
-dB
50 40 24 6 2 0
TIME
12
OVER