Filter
Top Products
23
PLAYBACK and EDITING
REPEAT RENUMBER ERASE SILENT SKIP AUTO MARK
FORMAT PRESET
Track Handling
Track Erase
To erase a track you want to erase;
• From stop status, select the track you want to erase
and press ERASE key.
• The track number selected is shown, and erase
message blinks for confirmation.
• Pressing ERASE key again, the track selected is
erased, and completion message is displayed for 3
seconds. Then resumes stop status.
• Instead, pressing STOP key cancels to erase the track
and resumes stop status.
Display at Track Erase Operation EMBED
Note
After a track is erased, the number of the following tracks after
the erased track are not automatically renumbered. The
number of erased track becomes absent. The track number of
the newly recording is always next to the last track number
(the largest track number +1). The absent track number is not
re-used for new recording (except that the deleted track was
the last track).To renumber the track numbers of tracks after
the absent number, track renumber operation is needed.
TRACK
OVER
TRACK
TRACK
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Renumbering Track Number
To renumber the track numbers of tracks after the
absent number caused by track erase;
From stop status, press RENUMBER key.Renumber
message blinks for confirmationPressing RENUMBER
key again, renumbering is executed. Completion
message is displayed for 3 seconds, and units resumes
stop status.
Instead, pressing STOP key, renumbering is cancelled,
and units resumes stop status.
Display at renumbering operation
OVER
5
5
5
5
5
5
5
5
5
5
5
5
Blinking for confrimation
Executing
Completion message (for 3 seconds)
Blinking for confrimation
Executing renumber
Complete message (for 3 seconds)
REPEAT RENUMBER ERASE SILENT SKIP AUTO MARK
FORMAT PRESET