Filter
Top Products
19
PLAYBACK and EDITING
Access to the Mark
Forward Mark Access
In stop status, pressing ¢/¡ key while pressing
JUMP TO MARK key makes the location jump to the
nearest next mark and the unit pauses there.
Then, every time pressing ¢/¡ key while pressing
JUMP TO MARK key, location jumps to next mark point
and pauses there. Pressing PLAY/PAUSE while
pausing, the unit starts playback from there.
Forward mark access from the last mark in a card result
in access to the first mark in the card.
After track count up/down (see page xxx), the forward
mark access makes jump to the mark next to the top of
the selected track.
Backward Mark Access
In stop status, pressing 1/4 key while pressing
JUMP TO MARK key makes the location jump to the
nearest previous mark and the unit pauses there.
Then, every time pressing 1 /4 key while pressing
JUMP TO MARK key, location jumps to previous mark
and pauses there. Pressing PLAY/PAUSE while
pausing, the unit starts playback from there.
Backward mark access from the first mark in a card
results in access to the last mark in the card.
After track count up/down (see page xxx), the
backward mark access makes jump to top of the selected
track.
Display at Mark Access
When the mark is accessed by forward mark access or
backward mark access, the mark number accessed
(sequential number) is displayed for one second instead
of track (TRACK icon turns off). Then, the display
shows track number accessed (TRACK icon turns on).
Editing Mark
Mark Definition and EDL Playback
The mark is used not only for easy accessing as
described above, but also for EDL playback (program
playback). Giving definition to certain marks, these
mark points becomes skip or repeat point in EDL
playback.
-dB
50 40 24 6 2 0
12
OVER
-dB
50 40 24 6 2 0
12
OVER
-dB
50 40 24 6 2 0
12
OVER
-dB
50 40 24 6 2 0
12
OVER
Point Skip –a –b
P : Point
S : Skip
-a : Repeat -a
-b : Repeat -b
Track number displayed is where
the mark to be defined exists.
Display while mark definition
Defining Mark
While pausing at the mark point after mark access
(Jump To Mark) operation, press MARK SELECT key.
Every time MARK SELECT key is pressed, the display
shows definition cyclically.
Showing one of above definitions you want on the
display, press PLAY/PAUSE key. Then the mark is so
defined.
-dB
50 40 24 6 2 0
TIME
12
OVER
-dB
50 40 24 6 2 0
TRACK
TIME
12
OVER
When a mark is placed, the mark
number accessed is displayed
(mark number = 132)
After one second, the track
number accessed is displayed
(track number = 121)