Filter
Top Products
14
PLAYBACK and EDITING
Audible Seek
This section explains about higher speed (x4) audible
access.
(refer to Summary of Accessing Behavior on page xxx
for the details)
Seek
+
Seek
+
is 4 times fast audible forward access.
Press and hold ¢/¡ during playback.
The unit playbacks forward at four times as high speed
as normal playback speed.
Holding the ¢/¡ presssed.
The unit keeps going the Seek
+
. Then releasing the
¢/¡, the unit resumes playback at the normal
speed. Playback time counter is displayed according to
the Seek
+
motion.
Note
While keeping on Seek
+
, the unit works as follows according
to repeat play mode (refer to Repeat Play on page xxx):
• If single track repeat mode is not set, Seek
+
goes through
the tracks util the end of the last track. Then;
• If entire track repeat mode is not set, the unit stays at
the end of the last track without sound.
• If entire track repeat mode is set, the unit skips to the
top of the first track and continues Seek
+
. (When entire
track repeat mode is on, whole tracks are assumed to be
continuous in a circle manner in Seek
+
, that is, next
track to the last track is assumed as the first track.)
• If single track repeat mode is set, Seek
+
works within the
current track only.
• When the unit reached the end of the track, the unit
skips to the top of the current track and continues Seek
+
.
Seek
-
Seek
-
is 4 times fast audible backward access.
Press and hold 1/4 during playback.
The unit playbacks backward at four times as high
speed as normal playback speed.
Holding the 1/4 pressed, the unit keeps going the
Seek
-
. Then releasing the 1/4, the unit resumes
playback at the normal speed. Playback time counter is
displayed according to the Seek
-
motion.
Note
While keeping on Seek
-
, the unit works as follows according to
repeat play mode (refer to Repeat Play on page xxx):
• If single track repeat mode is not set, Seek
-
goes through
the tracks util the top of the first track. Then stays there
without sound until the 1/4 is released. After
releasing 1/4, the unit resumes playback from there
at the normal speed.
• If single track repeat mode is set, Seek
-
works within the
current track only.
• When the unit reached top of the current track, the unit
stays there without sound until 1/4 is released.
After releasing 1/4, the unit resumes playback
from there at the normal speed.
Un-audible Fast Access
This section explains about 30-250 times fast un-audible
access.
(refer to Summary of Accessing Behavior on page xxx
for the details)
FF (Fast Forward)
FF is 30-250 times fast un-audible forward access.
Press and hold ¢/¡ during pause status.
The unit runs forward without sound at thirty times as
fast as normal playback speed.
After keeping ¢/¡ pressed for 2 seconds, the FF
speed shifts up to 250 times as fast as normal playback
speed.
Keeping ¢/¡ pressed, the unit keeps FF .
Playback time counter is incremented and displayed
according to the FF motion.
Releasing ¢/¡, the unit pauses at the location
shown by the time counter.
Note
While keeping on FF, the unit works as follows according to
repeat play mode (refer to Repeat Play on page xxx):
• If single track repeat mode is not set, FF goes through the
tracks util the end of the last track. Then;
• If entire track repeat mode is not set, the unit pauses at
the end of the last track.
• If entire track repeat mode is set, the unit skips to the
top of the first track and continues FF. (When entire
track repeat mode is on, whole tracks are assumed to be
continuous in a circle manner in FF as well as in Seek+.
That is, next track to the last track is assumed as the first
track.)
• If single track repeat mode is set, FF works within the
current track only.
• When the unit reached the end of the track, the unit
skips to the top of the current track and continues FF.
RWD (ReWinD)
RWD is 30 times fast un-audible backward access.
Press and hold 1 /4 during pause status.
The unit playbacks backward at thirty times as high
speed as normal playback speed.
After keeping 1/4 pressed for 2 seconds, the RWD
speed shifts up to 250 times as fast as normal playback
speed.
Keeping 1/4 pressed, the unit keeps RWD.
Playback time counter is decreased and displayed
according to the RWD motion.
Releasing 1/4, the unit pauses at the location
shown by the time counter.
Note
While keeping on RWD, the unit works as follows in relation
with repeat play mode (refer to Repeat Play on page xxx):
• If single track repeat mode is not set, RWD goes through
the tracks util the top of the first track, and pauses there.
• If single track repeat mode is set, RWD works within the
current track only.
• When the unit reached top of the current track, the unit
pauses there.