Filter
Top Products
20
PLAYBACK and EDITING
Display during EDL playback
During EDL playback, the play icon (3) blinks.
EDL Repeat Playback
Pressing REPEAT key while EDL playback, EDL
playback starts. The unit plays back between the marks
defined as Repeat -a and Repeat -b. The "REPEAT" icon
turns on. Pressing REPEAT key again, the unit exits
from EDL repeat, and resumes EDL playback without
REPEAT. The "REPEAT " icon turns off.
Display during EDL Repeat playback
During EDL Repeat playback, the play icon (3) blinks.
"REPEAT" icon turns on.
Note
Skip definition to the mark is effective during EDL Repeat
playback. Playback with skip is repeated between the marks
with Repeat -a and Repeat -b definition.
Meaning of Mark Definition
Mark put by REC/MARK key or AUTO MARK mode is
defined as Point (default definition). Then you can
change definition by above operation according to the
sequence control purpose such as skip play or repeat
play using defined mark.
The meaning of definition to the mark is as follows.
• Point (default); Mark without any sequence control
definition. This is only useful for JUMP TO MARK
access. In this case, mark is used like a bookmark in
the recorded contents.
• Skip ; Sequence control "Skip".
• -a ; Sequence control "Repeat -a".
• -b ; Sequence control "Repeat -b".
Note
• Skip definition is effective only in EDL playback.
• Repeat -a, -b definitions are only effective in EDL Repeat
playback mode.
• Mark defined as Repeat -a exits only one in a card. Mark
defined as Repeat -b exits only one in a card as well. To
define Repeat -a or Repeat -b, the mark defined last is
effective, and former mark with Repeat definition changed
to mark with Point definition.
• If Repeat -a is newly defined to a mark, the former mark
with Repeat -a definition is change to a mark with Point
definition (Mark with Repeat -b definition stay
unchanged).
• Similarly, if Repeat -b is newly defined to a mark, the
former mark with Repeat -b definition is change to a mark
with Point definition (Mark with Repeat -a definition stay
unchanged).
EDL Playback
To start EDL playback, presss PLAY/PAUSE key while
pressing JUMP TO MARK key. EDL playback always
starts from the top of the first track (track with the least
track number in the card). In EDL play, when the mark
with Skip definition is hit during EDL playback, jump to
next mark. If next mark is also defined as Skip, then
skip to next mark, until mark with definition other than
Skip.
Skip can occur beyond the track, as well as within the
track.
Note
If skip destination is not found (there is no POINT after
the last SKIP) the EDL Playback stops st the last SKIP
mark (the end of the track is assumed as the SKIP
destination).
REPEAT RENUMBER ERASE SILENT SKIP AUTO MARK
FORMAT PRESET
SKIPRepeat -a
JUMP JUMP
Recorded Contents
POINT
Playback Part of Recorded Contents
Skipped Part of Recorded Contents
SKIP SKIP
POINT
Repeat -b
SKIP
JUMP
Top of the first track
JUMP
Recorded Contents
POINT
Playback Part of Recorded Contents
Skipped Part of Recorded Contents
SKIP SKIP
POINT
-dB
50 40 24 6 2 0
TRACK
TIME
12
OVER
5
5
5
5
5
5
-dB
50 40 24 6 2 0
TRACK
TIME
12
OVER
REPEAT
5
5
5
5
5
5