User Guide
32
Programming a Direct Access Button Globally
1 Tap the Home menu button .
2 Complete steps 2 to 7 in “Programming device panel buttons”
on page 29. Instead of tapping a button on the touchscreen,
press the Direct Access button you want to program.
The label of the button you have pressed (e.g. chan+ or vol-)
starts flashing on the RC5000i icon.
Programming a Direct Access Button Locally
1 Switch to the device for which you want to program the button.
2 Complete steps 2 to 7 in “Programming device panel buttons”
on page 29. Instead of tapping a button on the touchscreen,
press the button you want to program.
The label of the button you have pressed (e.g. chan+ or vol-)
starts flashing on the RC5000i icon.
Reference
2. Labeling Buttons, Frames and Menu Items
The following elements can be labeled: buttons on a device panel,
text frames on a device panel (they don’t do anything except
display text), Device groups (the name for the Device group that
appears on the Device Tab and on the Home button), buttons on a
macro panel, macro groups (the name for the Macro group that
appears on the Macro Tab) and Left/Right hard buttons (these are
prelabeled at the factory to be Back and Ahead - reflecting the
RC5000i’s unique ability to browse the last six panels you’ve
viewed).
You cannot label Home menu buttons directly. You have to label
them via the Device menu (see page 34).
You can label part of the Home panel greeting: the words
“Welcome”, “To”, “Marantz” and “Home Theater” can be relabeled to
personalize your RC5000i.