Filter
Top Products
User Guide
27
Customizing Your RC5000i
2 Tap the mode button and press the LEARN mode button.
3 Tap the Device Tab and reveal the Device Menu.
4 While bracing the RC5000i with your right hand, press and hold
the Backlight button with a left hand finger.
5 Press and hold the Left hard button with your left hand thumb.
6 While still bracing, pressing and holding everything, use a right
hand finger to select the device from the Device Menu.
7 The EDIT window appears with the name of your Device at the
top of the window.
8 Program your macro following steps 10 through 15 on the
previous page.
Note In use, you can select a device without issuing the macro by
revealing the Device Menu, then pressing and holding the left
hard key, then selecting the device. Otherwise, every time you
select the device from home or select it from the device menu,
the macro will be sent.
To hide the Mode menu
To prevent accidental changes to the RC5000i interface and
commands once you’ve finished customizing, you can hide the
Mode menu.
1 Make sure the RC5000i is in Use mode.
2 Touch and hold the RC5000i icon for a few seconds.
The first setup panel appears.
3 Scroll down to the second setup panel.
4 Tap the Mode Menu button.
The mode menu icon is crossed out.
5 Tap . The RC5000i switches to Use mode. The Mode
button is no longer visible.
8. Protecting Your Work From Changes