SETUP
Lexicon
3-48
STEP DISTANCES LEVELSDISTANCES & LEVELS
When the MC-12 is finished calibrating
speaker distances, the AUTO DISTANCES
screen shown above will open on the
on-screen display, indicating the results for
each individual speaker.
• A value indicates that no errors occurred
during the calibration procedure.
• An ERROR message indicates that – although
a value was calculated – at least one error
occurred during the calibration procedure.
• Press the and arrow buttons to
highlight the desired speaker calibration
parameter. Then, press the arrow button
to view more detailed results for the selected
speaker. A message similar to the one
shown above will open on the on-screen
display.
• Refer to the table on page 3-50 for
information about all possible speaker
calibration messages.
When the MC-12 is finished calibrating
speaker distances and output levels, the
AUTO SPEAKER SETUP results screen shown
above will open on the on-screen display,
indicating the results for each calibration
procedure.
• An OK message indicates that no errors
occurred during the calibration procedure.
• An ERROR message indicates that –
although a value was calculated – at least
one error occurred during the calibration
procedure.
• Press the and arrow buttons to
highlight the desired calibration procedure.
Then, press the arrow button to select
this procedure.
• Selecting DISTANCES opens the AUTO
DISTANCES screen shown in the DISTANCES
column (left).
• Selecting the LEVELS option opens the
AUTO LEVELS screen shown in the LEVELS
column (right).
• Refer to the instructions in the appropriate
column to view more detailed results for
each individual speaker.
When the MC-12 is finished calibrating output
levels, the AUTO LEVELS screen shown above
will open on the on-screen display, indicating
the results for each individual speaker.
• A value indicates that no errors occurred
during the calibration procedure.
• An ERROR message indicates that – although
a value was calculated – at least one error
occurred during the calibration procedure.
• Press the and arrow buttons to
highlight the desired speaker calibration
parameter. Then, press the arrow button
to view more detailed results for the selected
speaker. A message similar to the one
shown above will open on the on-screen
display.
• Refer to the table on page 3-50 for
information about all possible speaker
calibration messages.
E-5
Step E: Performing Automatic Calibration
(continued from page 3-47)
Refer to the table on page
3-50 for information about
all possible speaker calibration
messages.
AUTO DISTANCES
FRONT LEFT 12.0ft
CENTER 10.5ft
FRONT RIGHT 12.0ft
SIDE RIGHT 4.5ft
REAR RIGHT ERROR
REAR LEFT 6.0ft
SIDE LEFT 4.5ft
MONO SUB N/A
SUB RIGHT N/A
LFE N/A
FRONT LEFT 12.0ft
FRONT LEFT
OK
Refer to the table on page
3-50 for information about
all possible speaker calibration
messages.
AUTO LEVELS
FRONT LEFT -2.0dB
CENTER ERROR
FRONT RIGHT -2.0dB
SIDE RIGHT -4.5dB
REAR RIGHT -3.0dB
REAR LEFT -3.0dB
SIDE LEFT -4.5dB
MONO SUB N/A
SUB RIGHT N/A
LFE N/A
FRONT LEFT -2.0dB
FRONT LEFT
OK
AUTO SPEAKER SETUP
DISTANCES OK
LEVELS ERROR
AUTO VALUES APPLIED
PRESS V TO VIEW
DETAILS