Lexicon Lexicon MC-12 Home Theater System User Manual


 
DIGITAL ANALOG AUTO
SETUP
Lexicon
3-16
Configuring Advanced Input Settings (continued from page 3-15)
INPUT SELECT Parameter Settings
The MC-12 sends the assigned digital audio
input connector to the Main Zone audio output
connectors. The MC-12 ignores the assigned
analog audio input connector.
Note the following:
When an incompatible digital source is
present, the MC-12 automatically selects
the assigned analog audio input connector.
The digital audio input connectors are
compatible with PCM (44.1, 48, 88.2, and
96kHz), Dolby Digital, and dts(-ES)
sources. The digital audio input connectors
are not compatible with MPEG or MP3
sources.
The MC-12 automatically sets the INPUT
SELECT parameter to DIGITAL when no
analog audio input connector is assigned.
The INPUT SETUP menu DIGITAL IN
parameter can be used to assign a digital
audio input connector for the selected
input.
The MC-12 sends the assigned analog audio
input connector to the Main Zone audio output
connectors. The MC-12 ignores the assigned
digital audio input connector.
Note the following:
The MC-12 automatically sets the INPUT
SELECT parameter to ANALOG when no
digital audio input connector is assigned.
The INPUT SETUP menu ANALOG IN
parameter can be used to assign an analog
audio input connector for the selected
input.
The MC-12 toggles between sending the assigned
digital and analog audio input connectors to the Main
Zone audio output connectors based on the input
source that is present.
For example:
The MC-12 selects the assigned digital audio input
connector when a compatible digital source is
present. The MC-12 will not select the assigned
analog audio input connector when a compatible
digital source is present.
The MC-12 selects the assigned analog audio input
connector when an incompatible digital source is
present.
The MC-12 selects the assigned analog audio input
connector when an analog source, such as an
SACD, is present.
Note the following:
The MC-12 automatically sets the INPUT SELECT
parameter to AUTO when both digital and analog
audio input connectors are assigned.
The AUTO setting is recommended for components
that generate both digital and analog input signals,
such as DVD/SACD players.