Filter
Top Products
SETUP
Lexicon
3-66
Trigger Setup (continued from page 3-65)
REMOTE ONLY ON, OFF
Configures the selected trigger output connector for remote
operation. Select the ON setting to configure the selected connector
for remote operation. Select the OFF setting to configure the
selected connector for program operation. Refer to the Program
Operation Parameter description below for more information.
When configured for remote operation, the connector labeled 1
can be activated and deactivated with the MODE + and – buttons
when the Zone 2 command bank is activated, and the connector
labeled 2 can be activated and deactivated with the MODE + and –
buttons when the Record Zone command bank is activated.
Note:
When the REMOTE ONLY parameter is set to ON, all
TRIGGER SETUP menu program operation parameter
settings are ignored.
Program Operation Parameters ON, OFF
Configure the selected trigger output connector for program
operation when the REMOTE ONLY parameter is set to OFF. Select
the ON setting to associate the selected connector with the
corresponding input(s) or listening mode.
Program Operation ParameterTRIGGER 2
OR
TRIGGER 1TRIGGERSSETUP
REMOTE ONLYTRIGGER 2
OR
TRIGGER 1TRIGGERSSETUP
When configured for program operation, the connector activates
when the associated inputs or listening modes are activated and
deactivates when the associated inputs or listening modes are
deactivated.
Note the following:
• Connectors can be associated with individual Main Zone inputs
and listening modes, as well as the Zone 2 and Record Zone
inputs.
• Connectors cannot be associated with individual Zone 2 and
Record Zone inputs.
• Connectors can be associated with multiple inputs and listening
modes at the same time.
Note:
When the CUSTOM menu RESET MODE option is
selected to restore the factory-default version of the
selected listening mode, the corresponding TRIGGER
SETUP menu program operation parameter is
automatically set to OFF.
LOCK OPTIONS
Selecting the SETUP menu LOCK OPTIONS option opens the LOCK
OPTIONS menu shown on the next page, which can be used to
protect MODE ADJUST, AUDIO CONTROLS, and SETUP menu
branch parameter settings from accidental changes.
LOCK OPTIONSSETUP