Filter
Top Products
Microphone Input Connectors
Composite & S-video Performance (continued)Zone 2 & Record Zone Audio Performance (continued)
Appendix
MC-12
A-3
• 100Ω in parallel with 150pF (RCA connectors)
•50Ω in parallel with 150pF (XLR connectors, Zone 2
only, MC-12 Balanced only)
Output Impedance
• 105dB minimum, 108dB typical, 22kHz bandwidth
• 200mVrms (4Vrms for maximum output level)
• 100kΩ in parallel with 150pF
• 200mVrms typical, 4Vrms maximum (RCA connectors)
• 400mVrms typical, 8Vrms maximum (XLR connectors,
Zone 2 only, MC-12 Balanced only)
• Maximum value with full-scale input signal and volume
at 0dB
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Output Level
Video Input & Output Connectors
• 5 composite (RCA), 8 S-video, and 4 component
video (3 RCA and 1 BNC)
• 4 composite (RCA, 2 monitor and 2 Record Zone), 2
S-video (2 monitor and 2 Record Zone), and 1
component (BNC)
Video Inputs
Video Outputs
• 4 3.5mm miniature phone jacksInputs
• 10mVrms (400mV maximum input level)Input Sensitivity
• 20kΩ (accepts balanced or unbalanced input signals)
. . . Specifications continues on page A-4
Input Impedance
• >40dB
• <0.5%
• <0.5°
• >25MHz
• <0.3%
• ±0.15dB
• >70dB
Input Return Loss
Differential Gain
Differential Phase
Bandwidth
K Factor
Gain
Signal-to-Noise Ratio
• 10Hz to 10MHz + 0.1/-0.3dBFrequency Response
Composite & S-video Performance
• NTSC, PAL, and SECAM
• Active
• 1.0V peak-to-peak
Compatibility
Switching
Output Level
•75ΩImpedance
Component Video Performance
• 3-channel (Y, Pr, Pb), format-independent
• Passive
•75Ω
Compatibility
Switching
Impedance
• <3dB
• >300MHz
Insertion Loss
Bandwidth
Specifications are subject to change without notice.