Lexicon Lexicon MC-12 Home Theater System User Manual


 
SETUP
MC-12
3-65
REC PWR ON LAST LVL, -80 to +12dB
Selects the volume level at which the Record
Zone activates. When a value is selected, the
MC-12 automatically sets Record Zone
REC PWR ONVOLUME CONTROLSSETUP
TRIGGER SETUP
REMOTE ONLY ON
DVD1 OFF
DVD2 OFF
LD OFF
TV OFF
SAT OFF
VCR OFF
CD OFF
PVR OFF
GAME OFF
TAPE OFF
TUNER OFF
AUX OFF
ZONE2 INPUTS OFF
RECORD INPUTS OFF
FILM OFF
TV OFF
MUSIC OFF
MUSIC SURR OFF
PLII + OFF
PLII MOVIE OFF
PLII MUSIC OFF
PRO LOGIC OFF
FILM OFF
MUSIC OFF
NIGHTCLUB OFF
CONCERT HALL OFF
CHURCH OFF
CATHEDRAL OFF
PANORAMA OFF
2-CH SURROUND OFF
2-CHANNEL OFF
MONO LOGIC OFF
MONO SURROUND OFF
MONO OFF
5.1 FILM OFF
5.1 TV OFF
5.1 MUSIC OFF
5.1 SurEX OFF
5.1 MUSIC OFF
DIGITAL EX OFF
5.1 2-CHANNEL OFF
5.1 MONO LOGIC OFF
5.1 MONO SURR OFF
5.1 MONO OFF
FILM OFF
MUSIC OFF
OFF
MUSIC OFF
OFF
2-CHAN OFF
5.1a FILM OFF
5.1a MUSIC OFF
5.1a SurEX OFF
5.1a MUSIC OFF
5.1a STANDARD OFF
5.1a 2-CHANNEL OFF
5.1a BYPASS OFF
2CH BYPASS OFF
R
R
ON
OFF
TRIGGER SETUP
TRIGGER 1 REMOTE
TRIGGER 2 REMOTE
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
TRIGGERS
Record Zone during the previous operating session.
TRIGGER SETUP
Selecting the SETUP menu TRIGGERS option prompts the selection of the desired trigger output connector –
1 or 2. The MC-12 includes three 12V DC trigger output connectors labeled PWR (power), 1, and 2. The power
connector is not configurable. It is activated when the MC-12 is activated and deactivated when the MC-12 is
deactivated. The other connectors can be configured for remote or program operation.
Selecting TRIGGER 1 or TRIGGER 2 opens the corresponding TRIGGER SETUP menu, which can be used to configure
the selected trigger output connector. The TRIGGER SETUP menu shown at the right is used as an example. The
parameters on the left side of the TRIGGER SETUP menus are identical regardless of which connector is selected. The
parameter settings on the right side are adjustable. The TRIGGER SETUP menu shown at the right indicates factory-
default parameter settings for both connectors.
Default Possible
Parameter Setting Settings
REMOTE ONLY ON ON, OFF
Program Operation OFF ON, OFF
All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter – are considered program operation parameters.
. . . TRIGGER SETUP continues on page 3-66
TRIGGERSSETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
volume level to the selected value when the Record Zone is
activated. When LAST LVL is selected, the MC-12 sets Record Zone
volume level to the last volume level that was selected in the