Filter
Top Products
Button Navigation Command(s)
Basic Operation
MC-12
2-11
MAIN MENU
The MAIN MENU represents the beginning
of the menu structure. It can be used to
open the three main menu branches: MODE
ADJUST, AUDIO CONTROLS, and SETUP.
MENU NAVIGATION
The remote control MENU and arrow buttons must be used to
navigate the extensive menu structure shown in the Appendix. The
table below indicates the navigation commands remote control
buttons perform when the Main Zone command bank is activated.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
• When a menu is open, pressing the MENU button closes the menu structure.
• When no menus are open, pressing the MENU button opens the MAIN MENU.
• When a menu is open, pressing the arrow button selects the highlighted menu item, which selects the highlighted
parameter setting or opens a menu, drop-down menu, or horizontal graph.
• When no menus are open, pressing the arrow button opens the MAIN MENU.
• When a menu is open, pressing the and arrow buttons scrolls upward and downward through the complete list
of menu items. The highlighted menu item appears on the front panel display. All menu items appear on the on-screen
display. A scroll bar appears on the right side of the on-screen display when menu items exceed the on-screen display
top and bottom margins. The cursor automatically wraps to the next menu item when the first or last menu item is
passed.
• When a menu is open, pressing the arrow button closes the menu and, in most cases, opens the previous menu.
Subsequent presses continue to close the current menu and open the previous menu until the MAIN MENU is closed.
When the MAIN MENU is closed, the menu structure is also closed.
• When no menus are open, pressing the arrow button performs no function.
• When a drop-down menu is open, pressing the arrow button selects the current setting and closes the drop-down
menu.
MENU