Introduction
Lexicon
ii
Represents a menu path.The menu items in gray boxes must be selected with the
arrow button to access the menu or menu item in the black box. For instance,
the SETUP, INPUTS, and DVD1 menu items must be selected to open the DVD1
INPUT SETUP menu.
The DVD1 input is used here as an example, and will continue to be used as an
example throughout this document.Whenever it appears as a step in a menu path,
any other input may be substituted. Likewise, whenever the DVD1 INPUT SETUP
menu appears, any other INPUT SETUP menu may be substituted.
DVD1 INPUT SETUPDVD1INPUTSSETUP
DOCUMENTATION CONVENTIONS
This document contains general safety, installation, and operation instructions for the MC-12 and MC-12 Balanced Digital Controllers. It is important to read this user guide
before attempting to use this product. Pay particular attention to safety instructions.
The following symbols are used in this document:
Appears on the component to indicate the presence of
uninsulated, dangerous voltage inside the enclosure – voltage
that may be sufficient to constitute a risk of shock.
Appears on the component to indicate important operating
and maintenance instructions in the accompanying literature.
Calls attention to a procedure, practice, condition or the like
that, if not correctly performed or adhered to, could result in
injury or death.
Calls attention to a procedure, practice, condition or the like
that, if not correctly performed or adhered to, could result in
damage or destruction to part or all of the product.
Note: Calls attention to information that is essential to highlight.
CAUTION
WARNING
• This document uses the term MC-12 to refer to both the MC-12 and MC-12 Balanced Digital Controllers unless otherwise specified.
• This document uses the term dts(-ES) to indicate that dts-ES encoding may or may not be present in the input source.