Filter
Top Products
RV-8 Setup
3-11
VIDEO IN COMPOSITE-1 TO 5, S-VIDEO-1 TO 5, NONE
Opens the VIDEO IN menu, which is used to assign a composite or
S-Video input connector for the selected input. The RV-8 has eight
configurable inputs, each of which can be assigned to any of its five
composite or five S-Video input connectors.
Note:
Composite video output connectors are available when a composite or
S-Video source is present.
S-Video output connectors are available when an S-Video source is
present.
COMPONENT IN COMPONENT-1 to 3, VIDEO, NONE
Opens the COMPONENT IN menu, which is used to assign a
component video input connector for the selected input. The RV-8
has eight configurable inputs, each of which can be assigned to any
of its three component video input connectors.
Alternatively, COMPONENT IN can be assigned to VIDEO. This will
cause the composite or S-Video signal selected for the VIDEO IN
parameter to be converted to component input. The NONE setting
shuts off the component output.
Note:
When the component is set to NONE, black and blue lines appear on the
screen if the monitor does not have auto-sense.
DVD1 VIDEO IN
COMPOSITE-1
COMPOSITE-2
COMPOSITE-3
COMPOSITE-4
COMPOSITE-5
S-VIDEO-1
S-VIDEO-2
S-VIDEO-3
S-VIDEO-4
S-VIDEO-5
NONE
DVD1 COMPONENT IN
COMPONENT-1
COMPONENT-2
COMPONENT-3
VIDEO
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
LIVE! MED
MAIN ADVANCED
ZONE2 IN DIGITAL
ZONE2 ADVANCED
5.1a
FILM
5.1a
INPUT SETUP
DVD2
TV
SAT
VCR
CD
TUNER
PHONO
DVD1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
LIVE! CALIBRATION
TUNER SETUP
NONE
POWER MANAGEMENT
INPUTSSETUP
DVD1
VIDEO IN
INPUTSSETUP
DVD1
COMPONENT IN