Filter
Top Products
Basic Operation Lexicon
2-26
* History-dependent buttons perform different functions, depending on the Zone or device that is currently being controlled.
Check the bottom of the LCD for the currently controlled device.
34
33
39
35
37
35
36
38
BUTTON HOME
MAIN
PAGE1
MAIN PAGE2 ZONE2 PAGE1 ZONE2 PAGE2
33
History-dependent* When a menu is open, closes the menu and (in most cases), opens the previous
menu. Subsequent presses continue to close the current menu and open the
previous menu until the MAIN MENU is closed. When no menus are open, shows
the two-line status.
34
History-dependent* When a menu is open, closes the menu structure. When no menus are open,
shows the 2-line status.
35
History-dependent* Numbers 0 to 9, are used to enter the frequency of radio stations or to save/load
presets when the RV-8’s built-in tuner is the currently selected input.
36
History-dependent* If the RV-8’s built-in tuner is the currently selected input, toggles between AM/FM
frequency bands.
37
History-dependent* If the RV-8’s built-in tuner is the currently selected input, pressing this button will
save the currently selected tuner frequency into a preset slot. Also use this button
when programming the remote. See page C-4 for additional information.
38
History-dependent* Macro Buttons: M1 is for Macro 1, M2 is for Macro 2 and M3 is for Macro 3. See
page C-9 for additional information on how to use and program macros.
39
History-dependent* Activates the remote control backlight that illuminates the buttons and LCD
screen for easier visibility.