Filter
Top Products
Audio Controls Lexicon
4-2
AUDIO CONTROLS
Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu, which is used to customize the Main Zone audio output connectors and to
control the balance of the Zone 2 and Zone 3 audio output connectors. The BASS, TREBLE, TILT EQ, LOUDNESS, BALANCE and FADER parameters
affect the Main Zone audio output connectors, including all Main Zone inputs and listening modes, except the 5.1a BYPASS and 2CH BYPASS
listening modes. The ZONE2 BALANCE parameter controls the balance of the Zone 2 audio output connectors, including all Zone 2 inputs. The
ZONE3 BALANCE parameter controls the balance of the Zone 3 audio output connectors, including all Zone 3 inputs.
Note:
When LIVE! is active, the BASS, TREBLE, TILT EQ, and LOUDNESS
controls do not function and the corresponding parameters in the
AUDIO CONTROLS menu default to +0.0dB. The LOUDNESS
parameter defaults to OFF.
BASS –6.0dB to +6.0dB
Controls the amount of low-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R, Center, and
Subwoofer. The BASS Parameter Settings graph on the next page
indicates the frequency response of all BASS parameter settings.
TREBLE –6.0dB to +6.0dB
Controls the amount of high-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R and Center.
The TREBLE Parameter Settings graph on the next page indicates
the frequency response of all TREBLE parameter settings.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
AUDIO CONTROLS
BASS
TREBLE
TILT EQ
LOUDNESS
BALANCE
FADER
+0.0dB
+0.0dB
+0.0dB
OFF
<I>
<I>
ZONE2 BALANCE
<I>
ON
OFF
B< FADER >F
-6.0 to +6.0dB
-3.0 to +3.0dB
L< BALANCE >B
SETUP
ZONE3 BALANCE
<I>
Parameter
Default Setting
Possible Settings
BASS +0.0dB –6.0 to +6.0dB
TREBLE +0.0dB –6.0 to +6.0dB
TILT EQ +0.0dB –3.0 to +3.0dB
LOUDNESS OFF ON, OFF
BALANCE <|> L< to <|> to >R
FADER <|> B< to <|> to >F
ZONE2 BALANCE <|> L< to <|> to >R
ZONE3 BALANCE <|> L< to <|> to >R
AUDIO CONTROLS
BASS
AUDIO CONTROLS
TREBLE