Lexicon RV-8 Stereo Receiver User Manual


 
RV-8 Appendix A
A-3
Composite & S-Video Performance
Compatibility NTSC, PAL and SECAM
Switching Active
Output Level 1.0V peak-to-peak
Impedance
75Ω
Input Return Loss >40dB
Differential Gain <0.5%
Differential Phase <0.5°
Bandwidth >25MHz
K Factor <0.3%
Gain ±0.15dB
Signal-to-Noise Ratio >65dB
Frequency Response 10Hz to 10MHz + 0.1/–0.3dB
Component Video Performance
Compatibility 3-Channel (Y, Pr, Pb), format-independent
Switching Passive
Impedance 75Ω
Insertion Loss <3dB
Bandwidth >150MHz
Video Converter NTSC, PAL, SECAM, to Y/Pb/Pr
Microphone Input Connectors
Inputs Two microphone jacks
Input Sensitivity 10mV Rms (400mV maximum input level)
Input Impedance 20kΩ (accepts balanced or unbalanced input signals)
FM Tuner Performance
Tuning Range 64MHz to 108MHz
Usable Sensitivity <4uV, 1.6mV typical
Selectivity >87dBmV, 93dBmV typical
Frequency Response 50Hz to 16kHz, +0.1dB/-1.0dB
THD + Noise <0.4% at 1 kHz (stereo)
Signal-to-Noise Ratio 50dB minimum at 60dBmV
Image Rejection >50dB, >60dB typical
AM Suppression >45dB, >55dB typical
AM Tuner Performance
Tuning Range 520 to 1720kHz
Usable Sensitivity <8uV, 4uV typical
THD + Noise < 0.56%, 0.20% typical (1kHz, 60dBmV, 30% mod)
Wideband AGC >80dBmV
Phono Performance (MM)
Frequency Response 50Hz to 20kHz, +0.5dB/-0.5dB, rumble filter -4dB at 10Hz
THD + Noise < 0.20%, 20Hz to 10kHz, 4.7mV input
Signal-to-Noise Ratio 72dB minimum
Compatible Amplifier Connectors
Banana Plugs Standard 0.75 inch plugs
Spade Connectors Size 10-12 gauge
Bare Wire Up to 10 gauge bare wire
Other
Trigger Outputs One power on/off and one programmable connector on
detachable screw terminals (+12 VDC, 0.5 amps each)
RS-232 Serial Input/
Output
Two 9-pin D-sub connectors
FM Tuner Performance