Filter
Top Products
RV-8 Mode Adjust
6-25
DTS-ES DECODING
The DTS, DTS-ES, and DTS-ES Discr listening modes are designed
for, at a minimum, playback of 5.1-channel DTS, 5.1-channel
matrix-encoded DTS-ES and 6.1-channel discrete-encoded DTS-ES
sources.
The DTS, DTS-ES, and DTS-ES Discr listening mode names differ
depending on the encoding present in the input source, the
DECODING parameter setting and the speaker setup.
DTS-ES listening modes are available when DTS-ES decoding is
activated. The table at the bottom of the page shows the conditions
for the behavior of DTS-ES decoding when it is activated.
• DTS-ES decoding is activated when both the side and rear
speakers are present and the ES DECODING parameter is set to
ON or AUTO and a 5.1-channel matrix-encoded or a
6.1-channel discrete-encoded DTS-ES source is detected.
• DTS-ES decoding is deactivated when the ES DECODING
parameter is set to OFF or when the ES DECODING parameter
is set to AUTO and a 5.1-channel DTS source is detected.
• DTS-ES Discr mode decodes 6.1-channel discrete-encoded
DTS-ES sources when ES decoding is set to AUTO or ON in the
MODE ADJUST menu. The mode appears in the Setup menu
when a DTS 6.1 source is present and seven speakers are
selected in the SPEAKER SETUP menu.
Note:
The table below is not applicable to the DTS-ES THX, DTS THX ULTRA2
and DTS THX MUSIC listening modes. These listening modes will be
explained in greater detail later in this manual.
Input Source
Parameter Setting 5.1-Channel DTS
5.1-Channel
Matrix-Encoded DTS-ES
6.1-Channel
Discrete-Encoded DTS-ES
ES DECODING: AUTO DTS DTS-ES DTS-ES
ES DECODING: ON DTS-ES DTS-ES DTS-ES
ES DECODING: OFF DTS DTS DTS