Filter
Top Products
RV-8 Basic Operation
2-27
BUTTON ZONE3 PAGE1 ZONE3 PAGE2 DVD1 PAGE1 DVD1 PAGE2
33
When a menu is open, closes the menu and, in
most cases, opens the previous menu.
Subsequent presses continue to close the current
menu and open the previous menu until
the MAIN MENU is closed. When no menus are
open, this button performs no function.
Navigates to the left in the RT-10 or RT-20 menu
structure.
34
When a menu is open, closes the menu structure.
When no menus are open, shows the
two-line status.
Selects the highlighted RT-10 or RT-20 menu item.
35
Numbers 0 to 9 are used to enter the
frequency of radio stations or to save/load
presets when the RV-8’s built-in tuner is the
currently selected input.
Direct RT-10 or RT-20 title, chapter, group or track
number selection.
36
If the RV-8 built-in tuner is the currently selected
input, toggles between AM/FM frequency
bands.
Enters values 10 and above on the RT-10 or RT-20.
Press once for numbers in the teens, twice for
numbers in the twenties, and so on. Then press a
number button (0 to 9) to enter a second digit.
37
If the RV-8’s built-in tuner is the currently
selected input, saves the currently selected tuner
frequency as a preset. Also used to program the
remote. See page C-4 for additional information.
Deletes entries when RT-10 or RT-20 search modes
and certain playback modes are activated.
38
Macro Buttons: M1 is for Macro 1, M2 is for Macro 2 and M3 is for Macro 3. See page C-9
for additional information on how to use and program macros.
39
Activates the remote-control backlight to illuminate the buttons and LCD screen for easier
visibility.
34
33
39
35
37
35
36
38