Filter
Top Products
RV-8 Appendix C
C-5
USING PREPROGRAMMED CODES
To program the remote to make it compatible with other
components:
1. Manually power on the device to be operated.
2. Go to the SETUP mode by pressing both the HOME and ENT
buttons simultaneously for three seconds until SETUP appears at
the top of the LCD screen.
3. Press the P-PRO button next to the LCD screen.
4. The remote will be flashing “SELECT BUTTON” at the bottom of
the LCD screen. Press the button for the device you wish to
program. For example, to program a TV, press the TV button.
5. The remote will be flashing “FROM TABLE” at the bottom of the
LCD screen. Select the device from which to access the code table.
Note:
When using the Preprogramming method, always use the appropriate
button as shown in the column when asked ”FROM TABLE.” The
labels of the buttons may have been changed, but the codes are in
the positons as shown to the left. For example, the AUDIO Code table
will always be the top left button. The CD Code table will always be
the fourth button down on the right side of the LCD screen, etc.
Use DVD2, not DVD1, to access the DVD code library. DVD1 has
been preprogrammed to control the Lexicon RT-10 Disc Player.
6. The remote will be flashing “ENTER NUMBER.” Refer to the tables
starting on page C-18 and find the manufacturer/brand of your
device. (If programming the remote for the TV device, find the
TV’s device code table, and so on.)
7. Point the remote control toward the device and enter the first
three-digit code number selected for your device. There is no way
of knowing which code is the one that will have the functions that
more closely match your device than the others, so it is wise to try
them all. See step 9 on the next page. (Enter the code number
within 20 seconds of beginning the programming; otherwise the
remote will revert to the SETUP menu, and then after a period of
time, it will go back to the MAIN device page.) If there is more
than one code number assigned to your brand, try one code
number at a time until the right code number is found (the
number that turns off the device). If the device turns off when the
three-digit code is entered, make note of the code. It will have at
least some of the functions in it that are needed to control the
device.
8. Confirm that it is the right code by pressing the Power button. The
device should turn on. After it is confirmed that the right code is
entered, save the code by pressing the SAVE button on the LCD.
9. At this point try ALL of the buttons on the remote, and see which
ones work with the device. The majority of the buttons should