Filter
Top Products
Setup Lexicon
3-68
VOLUME CONTROL SETUP
Opens the VOLUME CONTROL SETUP menu, which is used to configure Main Zone, Zone 2, Zone 3, and Headphone volume levels.
MAIN PWR ON LAST LVL, –80 to +12dB
Sets the Main Zone volume level that will be selected whenever the
Main Zone is activated. When set to LAST LVL, the Main Zone
activates at the volume level that was last selected in the previous
operating session.
MUTE LEVEL –40dB, –30dB, –20dB, –10dB, FULL MUTE
Sets the amount of attenuation that occurs in the Main Zone when the
front-panel or remote control Mute button is pressed. When set to FULL
MUTE, Main Zone volume level will be fully attenuated. Otherwise, Main
Zone volume level will be attenuated to the selected level.
Z2 PWR ON LAST LVL, –80 to +12dB
Sets the Zone 2 volume level that will be selected whenever Zone 2 is
activated. When set to LAST LVL, Zone 2 activates at the volume level
that was last selected in the previous operating session. LAST LVL is
displayed on power up if the Zone 2 was powered off using the Zone
2 Off button on the remote control or front panel.
SETUP VOLUME CONTROLS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
VOLUME CONTROL SETUP
MAIN PWR ON
MUTE LEVEL
Z2 PWR ON
LAST LVL, -80 to +12dB
-30dB
-30dB
-30dB
-10dB
-20dB
-30dB
-40dB
FULL MUTE
LOCK OPTIONS
Z2 PWR ON -30dB
VOLUME CONTROL SETUP
MAIN PWR ON
MUTE LEVEL
ZONE PWR ON
-30dB
-30dB
-30dB
MAX VOL +12dB
SETUP
LIVE! CALIBRATION
HEADPHONE -30dB
VOLUME CONTROL SETUP
MAIN PWR ON
MUTE LEVEL
Z2 PWR ON
-30dB
-30dB
-30dB
Z2 PWR ON -30dB
HEADPHONE -30dB
MAX VOLUME +12dB MAX VOLUME +12dB
POWER MANAGEMENT
Parameter
Default
Setting
Possible Settings
MAIN PWR ON –30dB LAST LVL, –80 to +12dB
MUTE LEVEL –30dB –40dB, –30dB, –20dB, –10dB, FULL
Z2 PWR ON –30dB LAST LVL, –80 to +12dB
Z3 PWR ON –30dB LAST LVL, –80 to +12dB
HEADPHONE –30dB LAST LVL, –80 to +12dB
MAX VOLUME –12dB –80 to +12dB
SETUP VOLUME CONTROLS MAIN PWR ON
SETUP VOLUME CONTROLS MUTE LEVEL
SETUP VOLUME CONTROLS ZONE PWR ON