Kenwood AX-7 Stereo System User Manual


 
81
EN
Preparations
Basic section
Application section
Knowledge section
Important items
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
1 Remove the DVD/CD from the unit.
2 Press the DVD/CD 6 key.
3 Wait for some time and verify that the display
appears as above.
4 Wait a few seconds and turn the unit OFF.
Maintenance
Reference
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a
soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for
these agents may cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a mal-
function. Be specially careful not to use contact cleaners
containing oil, for they may deform the plastic component.
Caution on condensation
Condensation (of dew) may occur inside the unit when there
is a great difference in temperature between this unit and
the outside.
This unit may not function properly if condensation occurs.
In this case, leave the unit for a few hours and restart the
operation after the condensation has dried up.
Be specially cautious against condensation in a following
circumstances:
When this unit is carried from one place to another across
a large difference in temperature, when the humidity in the
room where this unit is installed increases, etc.
Memory backup function
Please note that the following items will be deleted
from the main unit’s memory if the AC power cord is
disconnected from the AC wall outlet for approximately
1 day.
Power mode
Input selector settings
Volume level
Sound preset settings
TAPE/VIDEO1, VIDEO2, TV, AUX, D.AUDIO input
level
A.P.S. setting
Sound mode settings
Room Equalizer settings
Manual Equalizer settings
D-BASS settings
TONE/TURN OVER setting
Speaker setting
Dimmer setting
Broadcast band
Frequency setting
Preset stations
Tuning mode
Timer settings
*5613/81-88/EN 06.1.6, 0:54 PM81