Filter
Top Products
80
EN
Preparations
Basic section
Application section
Knowledge section
1Press the SP SETUP key on the remote con-
trol, press the MULTI CONTROL @/# keys
to select “SP LEVEL”.
Setting the volume balance
Each time the key is pressed, the mode
switches.
SPEAKER MODE
SP LEVEL
SP DISTANCE
2Press the ENTER key.
3When the operation of step 2 is performed,
a test sound is put out and the speakers are
switched automatically.
For a front surround system
For a 5.1 Channel system
Speaker setting
4Press the MULTI CONTROL %/fi keys to ad-
just the volume.
÷ Adjustment is possible in the range from +10 dB
to -10 dB.
÷ Adjust so that all speakers are heard at the same
volume. Adjust the subwoofer as desired.
5Press the ENTER key.
÷ The "SP LEVEL" indication blinks.
÷ Press the SP SETUP key to end the operation.
1Press the SP SETUP key on the remote con-
trol, press the MULTI CONTROL @/# keys
to select “SP DISTANCE”.
Setting the speaker distance
Each time the key is pressed, the mode
switches.
SPEAKER MODE
SP LEVEL
SP DISTANCE
2Press the ENTER key.
3Press the MULTI CONTROL %/fi keys to set
the distance between the listening position
and the speaker "L".
4Press the MULTI CONTROL @/# keys and
make the settings for the next speaker.
5Press the ENTER key.
÷ The "SP DISTANCE" indication blinks.
÷ Press the SP SETUP key to end the operation.
The setting mode for the speaker "L" is
reached.
Adjustment is possible in the range from 0.3
m to 9.0 m.
For a front surround system
For a 5.1 Channel system
Make the settings for each speaker with the
operations of the steps 1 to 3.
*5613/72-80/EN 06.1.6, 0:54 PM80