Filter
Top Products
46
EN
Preparations
Basic section
Application section
Knowledge section
Listening to external input sources
÷ Adjustment is possible at the range of –2 to +14.
1
Select an external input source.
2
Play the connected equipment.
3
Adjust the volume.
Adjusting the external input level (TAPE/VIDEO1, VIDEO2, TV, AUX)
This adjusts the input level for the external equipment (cassette deck etc.) connected to the external input
terminal. Adjust the level for the external input sources to sound like an equivalent volume to CD.
1Press the MODE key, turning the INPUT
SEL./MULTI CONTROL knob to select "IN-
PUT LEVEL". Then press the SET key.
2Select input level. Then press the SET key.
Select below item;
"TAPE/VIDEO1"
"VIDEO2"
"TV"
"AUX"
Decrease
the volume
Increase
the volume
Turn INPUT SEL./MULTI CONTROL knob [press
the INPUT SELECTOR key on the remote].
Decrease
the volume
Increase
the volume
÷ Operation with the remote control also is possible.
In that case, press the MULTI CONTROL %/fi key
on the remote control instead of turning the INPUT
SEL./MULTI CONTROL knob.
L
R
30 10 5 3 1 0
(-dB)
12345
MAIN UNIT REMOTE
External input level
MAIN UNIT REMOTE
*5613/46-51/EN 06.1.6, 0:53 PM46