Filter
Top Products
68
EN
Preparations
Basic section
Application section
Knowledge section
Timer operation
6
Set the desired Timer operation.
1Select the mode.
(1) Turn the INPUT SEL./MULTI CONTROL
knob to select "PLAY" or "AI PLAY".
(2) Press the SET key.
2Adjust the volume level.
(1) Turn the INPUT SEL./MULTI CONTROL
knob to adjust the volume level.
(2) Press the SET key.
3Select input source.
(1)Turn the INPUT SEL./MULTI CONTROL
knob to select a source to be played.
(2) Press the SET key.
4Select broadcast station (only when TUNER
is selected above).
(1)Turn the INPUT SEL./MULTI CONTROL
knob to select the preset station No.
(2)Press the SET key.
Switching as shown below is done each time the
knob is turned.
"PLAY"
(Timer play back)
"AI PLAY" (Timer play with gradually increasing
volume)
÷ When "PLAY" is selected, the timer playback will start
at the set volume level.
÷ When "AI PLAY" is selected, the timer playback will
start at volume 0 and increase to the set volume level.
Switching as shown below is done each time the
knob is turned.
"TUNER"
"DVD/CD"
"TAPE/VIDEO1"
"VIDEO2"
"TV"
÷ When the timer setting is completed by pressing the
SET key, "COMPLETE" is displayed.
To modify the setting contents, restart the
timer setting from the beginning.
*5613/65-71/EN 06.1.6, 0:54 PM68