JVC CA-NXG9 Stereo System User Manual


 
30
Recording from a Disc
You can record sound from a disc onto the USB device
connected to the USB 2 terminal.
You can record the tracks on Audio CDs in digital
recording. Sound from other kinds of discs is
recorded in analog.
You cannot record sound of DivX, ASF, or MPEG
files.
You can also select analog recording for Audio CDs.
(See the next column.)
When MIC MIXING is activated, the sound is
recorded in analog for all discs.
Do not vibrate the System while recording tracks.
Take care especially while the REC indicator is
flashing or while “WRITING” is shown on the
display. It may damage the recorded tracks on the
USB device.
See page 65 for more information about the warning
messages shown on the display.
Before recording....
Connect a recordable USB device to the USB 2
terminal. (See also page 7.)
1 Start and stop playback of the disc.
For SVCD/VCD, cancel PBC (see page 13).
2 Select the first track you want to record.
(Not applicable to DVD and DVD-VR.)
The System records from
the selected track to the
last one.
3 Enter recording mode.
4 Select a group to record tracks into.
G 1 GROUP1?
If “FORM GR?” is selected, the System will
automatically create the new group.
You can also give title to the new group before
recording. See page 31.
5 Start recording.
Both recording and playback start at the same time.
When playback ends, recording also stops.
You cannot change the source while recording.
If Program Play is activated (see “Programming
the Playing Order—Program Play” on page
25), the tracks are recorded in the programmed
order.
If the remaining time for the recording exceeds
10 hours, “_” is displayed in the hour-digit.
To stop
recording
manually:
To record the playing track (1
track) (not applicable to DVD
and DVD-VR):
During play or pause...
Then, follow the steps 4 and 5
above.
To record in analog
When digital recording is prohibited, you can record
in analog.
After step 2 of “Recording from a Disc”...
When the message is displayed, follow the steps 3 and
after.
REC
1>0:04:27
Remaining time for the recording
Track now being recorded
ANALOG REC?
4 sec
(on the main unit)
(on the main unit)
text_EN_NXG9G5.indb 30text_EN_NXG9G5.indb 30 08.8.5 10:52:30 AM08.8.5 10:52:30 AM