Filter
Top Products
CHAPTER 1 – Introduction
SYS7180VE User’s Manual
3
3.3 V output must reach its minimum regulation level within 20ms of the +5V
output reaching its minimum regulation level
The following table lists the power supply’s tolerances for DC voltages:
DC Voltage
Acceptable Tolerance
+3.3 V ± 5 %
+5 V ± 5 %
+5 VSB (standby) ± 5 %
-5 V ± 5 %
+12 V ± 5 %
-12 V ± 5 %
CHAPTER 1 – Introduction
4
SYS7180VE User’s Manual
1.5 Connector & Jumper Location